Iv recently bought a phantom 2 v2, as I was on a budget I couldn't afford the zenmuse gimbal so I bought the walkera G-2d
It's fits perfect and iv powered it up using the Aux cables of the p2.
Installed the xiaomi yi camera and it works really good.
So today I thought I would connect the tilt
Couldn't find any info about where to go apart from some YouTube videos
As iv used the Aux power to power the gimbal I don't need to use the naza to power it so I only needed the white wire from the gimbal to the f2 on naza .
Tilt works fine ,, letting go of x1 abd the gimbal returns back to its calibrated position.
The only thing I and noticed when the tilt facility is not connected the gimbal works 100%
But if I connect the tilt up from f2 the gimbAl is a lot slower to react on movement
If I was to move p2 as if I'm going forward and backwards the gimbal takes its time and takes about 3 seconds to level out
I have video to show what I mean.
Does anyone know the fix for thus
It's fits perfect and iv powered it up using the Aux cables of the p2.
Installed the xiaomi yi camera and it works really good.
So today I thought I would connect the tilt
Couldn't find any info about where to go apart from some YouTube videos
As iv used the Aux power to power the gimbal I don't need to use the naza to power it so I only needed the white wire from the gimbal to the f2 on naza .
Tilt works fine ,, letting go of x1 abd the gimbal returns back to its calibrated position.
The only thing I and noticed when the tilt facility is not connected the gimbal works 100%
But if I connect the tilt up from f2 the gimbAl is a lot slower to react on movement
If I was to move p2 as if I'm going forward and backwards the gimbal takes its time and takes about 3 seconds to level out
I have video to show what I mean.
Does anyone know the fix for thus