When the video quits the screen goes black except for any and all control items, settings, values, etc. Only what the camera was seeing disappears. There are no messages, no errors, no warnings, or anything out of the ordinary. The craft flies fine, just you have no FPV. RTH, camera controls, time, battery values, all that is available on the iPhone screen as it normally is located. Then after a few seconds the video feed returns. At that point you have to start the video record each time if you choose. This is what I mean about re-setting. It continues this cycle. I know the issue is in the camera/gimble area. I have 2 P3P's. I switched out the cameras and the aircraft work as it should.
Had to replace the ribbon cable that provides info/power to the gimble and camera. The odd flat black plastic one that winds around the Gimble/Camera. The LED on the front of the housing flash's red green red green etc. all the time. Almost as though it can't complete a process.
Thanks for your time with this issue