Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

V01.05.0030 upgrade success signals?

Discussion in 'Pro/Adv Discussion' started by Kenneth Gundersen, Dec 8, 2015.

  1. Kenneth Gundersen

    Joined:
    May 30, 2015
    Messages:
    74
    Likes Received:
    23
    Location:
    Terneveien 5, Lyngdal, Norway
    No read-me document this time. So what is the success signals (sound/LED) when upgrade is finished? I just started the upgrade. Now the little LED is blinking red-green-red-green.... and sound is beep-beep-beep-beep....pause...then repeat. A bit afraid to stop if it is not finished.
     
  2. happydays

    Joined:
    Jul 5, 2013
    Messages:
    1,850
    Likes Received:
    659
    Location:
    Warrenpoint, Ireland
    The camera light will go solid green when complete and the sound will change to D - DD
     
    Kenneth Gundersen likes this.
  3. Kenneth Gundersen

    Joined:
    May 30, 2015
    Messages:
    74
    Likes Received:
    23
    Location:
    Terneveien 5, Lyngdal, Norway
    Thank you friend. I keep waiting :)
     
  4. happydays

    Joined:
    Jul 5, 2013
    Messages:
    1,850
    Likes Received:
    659
    Location:
    Warrenpoint, Ireland
    Mine took about 12 minutes. When it is complete, look at the text file on the SD card - it should say success next to the firmware version 1.5.000
     
    Kenneth Gundersen likes this.
  5. Kenneth Gundersen

    Joined:
    May 30, 2015
    Messages:
    74
    Likes Received:
    23
    Location:
    Terneveien 5, Lyngdal, Norway
    Packet: P3X_FW_V01.05.0030.bin
    Upgrading ...
    Result: Success.

    Then I'm all set :)
     
    happydays likes this.
  6. robert velez

    Joined:
    Jun 25, 2015
    Messages:
    44
    Likes Received:
    8
    Location:
    USA
    You can also check in About or Settings on the App for firmware versions on both RC and Phantom.
     
    Kenneth Gundersen likes this.