I make sure the RTH altitude is 80-100 before each flight. My colleague was flying the drone, it was reaching criticly low battery so he landed it after canceling the RTH. When he landed it he turned off the remote before turning off the drone less than a second after the drone had landed, even though i told him the remote is the first thing and last thing you turn on/off. The drone instantly turned back on, raised to about 15-20 m and tried to RTH straight into a tree, even though i had altitude set way higher than that. Does this mean if you turn off the remote and the aircraft is disconnected on dji go, the RTH altitude is lost and reset to default? or did it possibly do this because the smart RTH estimated it wouldnt have enough juice to raise to 100m and RTH?
Any way we recovered the drone and it was not damaged. He now understands why the remote should be last thing to turned off but thinks im being too an*l when i tell him not to turn the drone on before the remote, what are the dangers of turning on drone before the remote?
Any way we recovered the drone and it was not damaged. He now understands why the remote should be last thing to turned off but thinks im being too an*l when i tell him not to turn the drone on before the remote, what are the dangers of turning on drone before the remote?