Raffelos said:
SlakerATX,
Thanks for the info, I tried about 5o different profiles, it won't work, I will email the seller to request a refund, I spend about 18 hrs dealing with this, computer is what I do for living and thta is not helping, LOL
I tried all the combination possible, I will like to know if anyone have the V3 up and running and what are the parameters.
Once again Thanks
In the simplebgc program on the basic tab I have the following set:
Roll: P=10, I=0.1, D=16, Power=120, Invert=blank, Num.Poles=14
Roll: P=10, I=0.08, D=17, Power=100, Invert=blank, Num.Poles=14
Axis TOP=Z
Axis Right=-Y
and I did a 6 axis calibration
The settings that slackeratx gave for the Phantom Assistant Program is a good starting point. The gains have to be set to 0. The servo limit for pitch you will probably want to tweak so the range of movement is straight ahead to straight down. The camera will keep bouncing if the camera goes much beyond straight down or any of the cables bind.
My Taco supreme came with the velcro mount and I upgraded it to the V3 mount. Here is a video that I shot in 30 MPH wind gusts with the V3.
http://youtu.be/1an5ts6PsCs