I have an FC40 which transmit on 5.8ghz and it will not bind to the receiver. I replaced the receiver and still it would not bind. I checked my remote with the RC software and it woulds fine. I also tried a phantom vision 2 with the egg camera transmitter which works on 5.8ghz and it would not bind either. The LED on the outside of the aircraft is continually flashing yellow. In the battery bay the LED is flashing red and once pressing it turns yellow which means to turn on your transmitter for binding. Once the transmitter is on the light goes out in the battery bay but I'm still getting a continuously flashing yellow light on the outside LED. Any help would be kindly appreciated.
R/
John
R/
John