Phantom 3 Pro Grainy + Rolling shutter?

[pilotblue]

Hey! First post... wish it was more positive

My Phantom 3 Pro has been getting really bad grain and this rolling shutter / glitchy issue noticeable while monitoring and also on the recorded video.

The following clip is shot at 4k 100 ISO with a ND8 filter

https://drive.google.com/open?id=0Bxqyzn2AdrEKUzYtV2k5ZGJlM3c

Bad camera? Whats going on?

 

[4wd]

Hard to see much from that tiny clip with it yawing violently about.
Could be prop flicker.

 

[Alex Baxter]

Back off the speed for starters, was it windy too? Maybe you're asking too much of the machine?

 

[MacCool]

Might be an issue with your shutter speed being set to long, both grain and rolling shutter effect. Ideally, the shutter speed will be about twice your video frame rate. I typically try to set my shutter speed at twice my video frame rate....somewhere between 1/60th to 1/120th of a second.

 

[pilotblue]

Ahhh prop flicker, makes sense. Knew there had to be a name for it. I'll keep a closer eye on the shutter speed.

I also just ordered a faster extreme pro SD card, we'll see if that helps

https://drive.google.com/open?id=0Bxqyzn2AdrEKcGVaQV9IcjhPa0U

 

[pilotblue]

kept the shutter at 120 and it was overcast so I'm pretty happy with the results. Still a lil grainy but I suppose thats due to the small sensor

https://drive.google.com/open?id=0Bxqyzn2AdrEKczlabXotaThGNkU

 

[Numone]

kept the shutter at 120 and it was overcast so I'm pretty happy with the results. Still a lil grainy but I suppose thats due to the small sensor

https://drive.google.com/open?id=0Bxqyzn2AdrEKczlabXotaThGNkU

Much better...