Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Professional no signal from Pro3 cam after crash

Discussion in 'Phantom 3 Help' started by mrsteadi, Jan 24, 2016.

  1. mrsteadi

    Joined:
    Jan 24, 2016
    Messages:
    1
    Likes Received:
    0
    Hi guys
    I'm brand new to Phantoms, so this noobie needs some help. I was doing a training flight with my 3Pro and happened to run into a light pole at around 5m high, it spun down and landed upside down in the grass. I managed to shut it down okay and replaced the one broken prop. The camera was in record mode at the time so I didn't get a finalized clip that wouldn't play, probably due to abnormal shut down.
    The problem now is the camera won't send out a signal and just makes a whirring sound and beeps at me. Is there a correction for this or have I buggered the camera? Any assistance would be greatly appreciated.
    Cheers
    Norbert
     
  2. DroneDestination

    Joined:
    Jan 15, 2016
    Messages:
    698
    Likes Received:
    126
    Check if all of the ribbon cables from the cam/gimbal to the drone are intact and TIGHTLY connected.
     
  3. hunch

    Joined:
    Oct 10, 2014
    Messages:
    1,500
    Likes Received:
    225
    yup, either cable nicked somewhere or main board failure