Hi All,
I'm new here, just got a used DJI Phantom 3 Standard that needed the gimbal put back on and the yaw arm replaced. I repaired the phantom and it flys perfectly, the camera looks fine except that it has a slight shake to it.
When the drone is on the floor or a table there is no shake, the camera was recalibrated after I landed and reviewed the footage but I haven't taken it back up since.
Below is a link to a short clip of the issue.
Please let me know if anyone has any ideas what might be causing this, I have also taken off the back cover of the camera to ensure that the gimbal pin is perfectly horizontal and not on a 45° angle causing a imbalance in the camera.
Thanks in advance,
Richard Allin
I'm new here, just got a used DJI Phantom 3 Standard that needed the gimbal put back on and the yaw arm replaced. I repaired the phantom and it flys perfectly, the camera looks fine except that it has a slight shake to it.
When the drone is on the floor or a table there is no shake, the camera was recalibrated after I landed and reviewed the footage but I haven't taken it back up since.
Below is a link to a short clip of the issue.
Please let me know if anyone has any ideas what might be causing this, I have also taken off the back cover of the camera to ensure that the gimbal pin is perfectly horizontal and not on a 45° angle causing a imbalance in the camera.
Thanks in advance,
Richard Allin