Right now controller GL300B @ 3.152
A/C 1.10.90
I'm having issues, unable to update firmware through sd card. Tried 3 different ones. They were all reformatted to fat32. I previously had poor image transmission, pixelated/green screen. Now I have no video at all, and gimbal doesn't respond to wheel movements. I've manually linked it to the inspire controller, same issue no video, blank screen. It will tell me home point has been updated, upon start up the gimbal twirls around then stops, a few seconds later the gimbal makes a buzzing sound a moves very slightly with no input from the controller.
When trying to update it flashes red/green then about 3-5 minutes in the gimbal light turns solid red and buzzes.