how to mute that start of noise... or at least muffle/lower?

[onfourblades]

any ideas?

 

[panhygrous pantler]

Re: how to mute that start of noise... or at least muffle/lo

any ideas?

Impossible unless you want to wrap all of the motors in some sound deadening material.

 

[sar104]

Re: how to mute that start of noise... or at least muffle/lo

any ideas?

I think that's the ESCs sending mixed phases to the motors - if so then unlikely there is much you can do about it.

 

[KG4MXV]

Re: how to mute that start of noise... or at least muffle/lo

If you were to hack the ESC operating code then you could get rid of the start up tones.

I am kinda sure that is the ESC's processor that is doing that not the Naza controller.

I will find out later this week when I get the servo test jig and Neewer ESC with a spare motor to set up a motor balancing jig.

 

[plasmo]

Re: how to mute that start of noise... or at least muffle/lo

Agree the startup sounds are **** loud... Would be nice to have some volume control in future updates


Sent from my iPhone using Tapatalk

 

[FedeVision]

Re: how to mute that start of noise... or at least muffle/lo

I have lowered the noise by covering the front arms (vent holes) with my hands.