I did not realize that the RC Transmitter needed to be powered On before
turning on the P2V for updating firmware, and remain On during the
whole update process. Is this really necessary?
Also, it appears that the flight battery is necessary in the P2V for firmware
updating, instead of the critical parts of the P2V being powered by the
5v from the USB port.
Further, in the video, they attach the P2V to the computer first, power on the
RC Transmitter, then power on the P2V, and THEN install the DJI driver.
I would have tried to install the driver first, before the P2V was even
plugged into the computer, but a message from the driver installer
asks if the "controller" (what is that?) is plugged in, and quits if you
say No.
Finally, I would not have known to try to update the P2V a SECOND time,
after doing the first update, and after updating the RC Transmitter.
No updates for the camera (done via its SD card) at this point?
The DJI website says that v34 is the latest for DJI-Vision,
but I got v36 when I download the app's APK file from
the DJI site. Which is the proper version to be using?
Very timely, since I will be doing this today.
Thanks.