That's great to hear. Can you disclose what firmware you're using in the RC? I'm on 1.4.1.0 RC firmware, but afraid to change this. If you have something newer that's compatible with 1.3.509 craft firmware, that may be the solution.I have the P4P with .509 firmware and HDMI module installed. It works. I had to switch HDMI cables before connection worked fairly reliably. I use a cable that does not require adapters, so less weight to it. Am using Android tablet with DJI Go 4. Still some stability issues in general. But does work.
Funny you say that. That's exactly how I feel about 509. You couldn't pay me to migrate off that version, simply because of the flexibility gained to change all the flight limitations in the craft firmware settings.I'm on 509 as well and I wouldn't budge even if it was promised a naked woman popped out of the remote if I did, lol.
Funny you say that. That's exactly how I feel about 509. You couldn't pay me to migrate off that version, simply because of the flexibility gained to change all the flight limitations in the craft firmware settings.
I have 1.4.1.1 on my rc with 509. No problem at all. That remote rev came with the new rc I had to get because the original remote developed the main board problem and wouldn't charge fully. I sweated out hoping 509 would be compatible and it is. The problem though is that you can't incrementally update firmware so it's right to the newest and I'm quite sure that would not be compatible with 509. If it is, I'd be mighty surprised.That's great to hear. Can you disclose what firmware you're using in the RC? I'm on 1.4.1.0 RC firmware, but afraid to change this. If you have something newer that's compatible with 1.3.509 craft firmware, that may be the solution.
Can you describe your "general stability" issues? Are you talking about the stability of your android display, or stability of the flight characteristics of the craft?
It works perfectly with no issue. Always has. I don't mess with a good thing. My daily air 2 is up to date firmware but I haven't flown with it.@shockwave199 Looking at your signature, why are you on ios 9 on you air2, I thought 10 was the sweets spot for that generation. It's working so don't mess with it or something else? Just curious.
What version firmware are you running on your RC?That's what I thought. l can tell you that 10.3.3 is solid with .509 and GO 4.08 as well. But no matter.
As to this thread, I have an HDMI module on my p3p controller and I also have one new in box that I never installed on the p4p because I didn't want to update either! My backup tablet is a Shield with HDMI if I ever really need to get a feed.
Well well well, that's interesting. So what I need to do is find an GL300F controller to buy with 1.4.1.1. I'm not sure if it's possible to load 1.4.1.1 on mine, but I'm not trying it anyway, I don't want to risk messing up a good thing. I'll buy another RC if I can find one used on eBay. Thanks for the tip!I have 1.4.1.1 on my rc with 509. No problem at all. That remote rev came with the new rc I had to get because the original remote developed the main board problem and wouldn't charge fully. I sweated out hoping 509 would be compatible and it is. The problem though is that you can't incrementally update firmware so it's right to the newest and I'm quite sure that would not be compatible with 509. If it is, I'd be mighty surprised.
What version firmware are you running on your RC?
I'm saying the bird and rc are fine with those firmware revs. I don't know if the hdmi module works with 1.4.1.1. I got my rc from drone nerds new for 275, if memory serves. They confirmed it had 1.41.1. With bum rc's out there, I'd be concerned about used unless absolutely sure.What version firmware are you running on your RC?
Well well well, that's interesting. So what I need to do is find an GL300F controller to buy with 1.4.1.1. I'm not sure if it's possible to load 1.4.1.1 on mine, but I'm not trying it anyway, I don't want to risk messing up a good thing. I'll buy another RC if I can find one used on eBay. Thanks for the tip!
Oh shoot, I got you mixed up with @philjmj . In Post #3 he says he has the HDMI module working with 1.3.509, but he hasn't replied to my question, asking what RC firmware he's running. There is a bunch of GL300F controllers for sale on eBay, I just need to find the right firmware to match what @philjmj is running.I'm saying the bird and rc are fine with those firmware revs. I don't know if the hdmi module works with 1.4.1.1. I got my rc from drone nerds new for 275, if memory serves. They confirmed it had 1.41.1. With bum rc's out there, I'd be concerned about used unless absolutely sure.
Oh shoot, I got you mixed up with @philjmj . In Post #3 he says he has the HDMI module working with 1.3.509, but he hasn't replied to my question, asking what RC firmware he's running. There a bunch of GL300F controllers for sale on eBay, I just need to find the right firmware to match what @philjmj is running.
That's interesting. If that's true I may be out of luck. Since updating the RC through the Go4 app is the only way, I'll never be able to do anything but update to the current firmware. Maybe I'll buy a used RC to test with and update it to the current rev. I can quickly determine if it works with my 509 craft firmware. I'll still have my original RC that works if the test RC fails.Just as a data point to store away; I've read where after installing the module, you must drop back one fw version and re-update to load the particulars for the module that don't get loaded when the module was not present. I don't know this first hand, but I have seen it mentioned more than once.
Thanks for the reply Philjmj. This is prior to my firmware, so I'm a bit puzzled why my HDMI module doesn't work. I think I'll try what Dave Pitman mentioned with another RC. I really miss flying with my goggles, only my P4 has a working HDMI port that work with my goggles.My remote controller: 01.03.00.00+
DJI Go 4 4.07