Hi Yes connect the PC and Helicopter cable to the adjust the angle from the screen very fast and easy Remember to Install driver and support program first Camera will turn 90
Which RC controller are you using DJI NDJ6 or the older DJ6 look at the tag on the backside of the unit. Actually what kind of problem are you having to have asked that question.
Which RC controller are you using DJI NDJ6 or the older DJ6 look at the tag on the backside of the unit. Actually what kind of problem are you having to have asked that question.
Hi! So the gimbal just stops at a certain angle that isn't entirely down and I don't know how to change this! I'm using a NDJ6 controller . Any help would be so appreciated!
Hi! So the gimbal just stops at a certain angle that isn't entirely down and I don't know how to change this! I'm using a NDJ6 controller . Any help would be so appreciated!
1) Confirm that the gimbal has power. To do that there an LED on the backside of the cameras mounting plate and when the P2 is powered up that LED should be lit.
2) If the LED isn't lit connect your P2 to the assistant an check the upgrades page to see if the gimbal is even recognized as
in this photo.
If it isn't recognized then do an factory reset as in this video.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.