- Joined
- Dec 27, 2014
- Messages
- 118
- Reaction score
- 7
I started to do the FPVLR stage two upgrade and pulled my controller apart. As I pulled the shell apart wires needed to be unplugged to pull it completely apart. I assumed that each plug I pulled was unique and didn't worry about location much. Only to find out that all three plugs I pulled are identical. I have a good idea where they go but want to make sure.
I assume plug one is the controller plug for the back of the controller
Plug two is the gimbal wheel
plug three is for the micro-usb cable
I assume plug one is the controller plug for the back of the controller
Plug two is the gimbal wheel
plug three is for the micro-usb cable