hello forum!
I am having problems in my ph3 adv, after trying to update the drone I am left beeping with a very loud sound and when connecting indicates the need for updating, the background that led to leaving the ph3 unusable are:
-crash
-replacement body
-probe in flight: the drone worked...
Howdy!
Any ideas on fixing that?
Short description:
Having P3P with 4K camera and gimbal. Most probably issue starts in gimbal because before trying some updates there was "No image transmission signal" message on DJI Go App.
Have tried different ways formatting SD card, putting different...
I tried upgrading my firmware today to P3C_FW_V01.09.0200. Unfortunately it failed. Does anybody know what [00606769]Packet upgrade failed at last version checking, Ret = -1. means?
Remote was not connected.
Before the update I've been having issues with my video and telemetry transmission...
We have been trying for several days to update the firmware on our new Phantom 3 Advanced to 1.9.60 with no success. Downloaded BIN file to SD card. Have tried different SD cards and reformatted SD cards. Have downloaded using Mac and Windows. Spoke with DJI tech support and they were not...
Ok so I just bought a Phantom 2 Vision Plus off my friend knowing that the ribbon cable and role motor were broken on the gimbal. I bought a new ribbon cable off ebay and glued the motor back into position. After hooking it back up and putting it together I turned on the phantom and nothing. The...
Hi all, I had the p2v+ connected to computer for updates etc. I had been a while since I had checked. i also had the RC turned on. A message said I needed a RC update. When I click "upgrade" my p2v+ started beeping and the gimbal started twitching. After a little while of this and thinking...
I have tried upgrading the firmware via the Android and iOS app unsuccessfully. This is what I have done:
1) Powered on the controller and the P3
2) Downloaded the update through the app
3) Clicked update in the DJI app
The following error message continues to popup:
"No SD Card inserted...
So i Crashed my phantom 3 and replaced all the broken parts. The internals looked pretty good, replaced all cables including the ribbon cable, now when I turn on my p3 the gimbal and camera do absolutely nothing. Took everything apart again and made sure all connections were tight, screws were...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.