Recent content by WGProductions

Hey Guys, I just bought a phantom 4pro and i'm having gimbal issues. Herre are the symptoms: 1) Heavy buzzing noise while in operation 2) Remote repeat beeping, RC update recommended 3) Message saying device versions may cause problems 4) Updated RC firmware 5) Beeping stopped, Gimbal now...

Hi Jason, Thanks for your reply. Its the hd3d gimbal.. Ive tried unscrewing the hex y axis and holding the motor but it seems to set back in its original position when i apply torq. Ive seen videos if guys doing that on the vision 2+ Gimbal, where i got the idea but hard to get it work on mine...

Hi! Ive had a crash recently and since then my HD3D gimbal is tilted to the right slightly about 15 Its a phantom 2 with a gopro 3+ black. Ive tried: -Basic / advanced IMU recalibration. My office table is pretty flat, the camera is way off with respect to its angle anyway! -Flashing...

Hey any news on this? Thanks!

I just tested the phantom after inversing the m1 cable on the naza and calibrating, works like new. I have noticed still a slight tendency to the left, but i'm guessing this is normal since there was a 5km/hr wind. I want to thank everyone for your help on this!!!

This sounds lile the most likely problem, I will give it a try and follow up! I also noted the IMU overheating while calibrating, and the phantom's behavior in the video is spot on.

I can see your point, as I have messed up some props allready. But his intention for me was to hold on to the landing gear, get the motors running a bit and see if it pulls up vertically so to avoid another crash before trying a full takeoff. Provided I wear some protective gear.

I changed the body following damage from a crash. I probably could of heated up the shell and glued, but I wanted to maintain its original condition! Transplant went well, kept all electronics. Also the Gimbal works well ( balances ) since transplant.

Hi! I have a DJI Phantom 2, and recently after changing the body on it things got messy. When I take off, or before im able to take off it banks hard to the left and crashes. Ive messed up my props that way and just received 2 sets of original DJI props. So I calibrate the IMU...