H
hunch
Profile posts Latest activity Postings Media Albums About
-
hunch, my bird does not turn on. It hit pretty hard. I posted several photos. The motherboard and inner screws are toast. If you're interested, please let me know if you want the accessories (i.e., batteries, transmitter, charger, etc). I'm going to make a decision pretty soon.
Thanks,
Scott HHi Hunch, Tony Bock said I should talk to you, I hope you don't mind answering a question. I installed a new ESC board after a crash P3A, it and got an ESC error when I tried to take off. It happens every time, and I got researching and found that I installed newer board that take the 800 kv motors and the motors that are in the Phantom are the 960 kv motors. Would this issue cause an ESC error?
Hi hunch, I am looking for a phantom 3 advanced motherboard? Do you have if you do can you how much are you charging for them? Please email me at [email protected]
Hi Hunch, I'm told you're the resident expert on Gimbals. Do you mind checking out this post of mine about jerky gimbal that came out of the blue, and see if you have a theory or advice? I've tried all the things recommended so far and it still just has the same behavior as you see in the video. Thank much, http://www.phantompilots.com/threads/jerky-gimbal.61105/
Hey man, thanks for the posting on my condensation in the camera lens.. I may have dried it out.. remains to be seen.. will test tomorrow...I will keep you posting and may get back to you for a camera.. Tks Jim Hall Dauphin Island Alabama
Sent an email to the site, and got your address. MN is a lot closer than Hong Kong!
where are you located?
it has stopped moving all together now. I've had it off and on for the past 2 days trying to figure it out since the new ribbon install. It shook the first few times I tried it, but its gone dead now.
I will work on that today, but I've found a bunch of people that have had the same problem. The gimbal works fine, or sort of fine, then the next time its powered up it goes crazy. One guy called itthe Harlem Shake, and that's exactly what it is.
hunch, I've heard your name and gimbals mentioned together a lot. I have a gimbal that's wagging like a dogs tail. What should I check. Ribbon cable has been replaced. Drone always drops the camera off at the magnetic joint, almost every flight. What should I check? I would have written more, but the site collars me to 420 characters.
after a minor crash. the camera refuse to tilt up or down. when i try to tilt . the gimbal starts to shake. p3Hunch, I have a P3 professional with a broken gimbal. I think one of the motors will need to be replace as well as both arms. Curious to know your success rate in repair and how much it would cost to fix. My email is [email protected]. ThanksGood afternoon sir,
From what I read here you are a skilled repair tech and I am in need of those services. I have a P3S with a damaged gimbal and some minor landing gear damage. Was wondering if I could ship this out to you and have you work on it? Email is [email protected]
Thanks in advance,
CaseyHi there, I'm new here but see your the reputable tech. I have a 2+ that I crashed. Gimbal is now rotated off center and has a tilted horizon in image on one hemisphere. Looking for some info on repair. Thanks!Hey Hunch I need your help man. I crashed my P3 Pro and am now getting an ESC error. By reading you other posts sounds like you are the man I need for repair. E-mail is [email protected] YOU HELP!!??!!Hunch, hope all is well. I saw your post about the P3 Pro which you have available. I currently have a P3 advanced. I crashed it once but it still flies great (one arm has a slight cosmetic issue with a small bend). Have been looking to upgrade. Any chance you want to work out a trade + cash? -
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
