Recent content by GetaGrip

  1. GetaGrip

    Looking for parts for Phantom 2 Vision

    viewtopic.php?f=9&t=18084
  2. GetaGrip

    DJI Phantom 2 Stock Camera Gimbal w/Servo

    Only used for about 10 flights, replaced with 2 axis. http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... 1384104369
  3. GetaGrip

    App not showing battery percentage or satellites

    This is most likely a bad camera cable. The Data you are missing is sent from the central circuit board to the camera and combined with the video down-link there.
  4. GetaGrip

    SMB & EXP Circuit Board Port Broke

    The telemetry data is sent via the camera cable and combined into the downlink signal of the camera transmitter. Your problem could be the cable or the connector in the camera.
  5. GetaGrip

    Film pricing explained

    Or, how long is a piece of string? :lol: https://archive.org/details/0050_How_Much_02_09_27_00
  6. GetaGrip

    Camera Not Working

    Welcome to the DJI Short-O-Matic camera cable. Disconnecting the camera cable while power is applied results in failure of the Central Circuit Board and it will need to be replaced.
  7. GetaGrip

    Battery Hard to Pull Out

    The problem I discovered is DJI used a piece of sticky back foam to hold the servo wire in place and this can become balled up and cause the sticking.
  8. GetaGrip

    Upwards Drift

    Sounds like it's trying to Return to a previous Home Location.
  9. GetaGrip

    Rotorpixel gimbal for Phantom Vision

    No Postal service in Canada today, Federal Government extra long weekend.
  10. GetaGrip

    Activate 7 channel resets after power restart

    The 7th channel hack does not work with version 3.0, you must revert back to version 1.8 or 2.0.
  11. GetaGrip

    Rotorpixel gimbal for Phantom Vision

    Still waiting for spring to arrive http://www.youtube.com/watch?v=_qco5TH4CqA
  12. GetaGrip

    Rotorpixel gimbal for Phantom Vision

    Here's a little quick and dirty set of landing gear extenders I came up with, works great.
  13. GetaGrip

    Post your Vision in the sky!!

    I'm very happy with it :D
  14. GetaGrip

    Broken Props - What to do?

    Having had to do some major change-outs I've cut down a set to about 2 inches for bench testing. It helps make sure everything is working as it should without enough lift to fly around.
  15. GetaGrip

    Rotorpixel gimbal for Phantom Vision

    The props in the shot was intentional to show just what the gimbal was doing during extreme maneuvers.
See more