Change work frequency

[randyandy]

Hello,

Is it possible to change the work frequency with the GoApp4 for Android?
I cannot change it. Nothing happens if i tap to the blue 5.8GHz button.

Is this just an issue with the Android version or are there any settings i have to do?

Thanks for your help

 

[Snowwolf]

Does anything happen when you click on the 5.8 blue tab ?

 

[randyandy]

Nope, unfortunately not.

 

[Snowwolf]

I will have a check of mine later, I know I can swap between the two

 

[axelz]

If it's like for the inspire you need to have tablet/phone in specific region, for example with U.K. set can't change frequencies but for US think you can? Can switch between 5.8 and 2.4 fine though still

 

[MrFlibble]

Looks similar to what happens to the P3Pro if your in Europe, you can get access to the ability to change transmission settings if you change your language / location in android to USA. Think its down to what frequencies can be used in what countries.

 

[randyandy]

Hmm, if i change the language to US, i still cannot change between those two.
But now it's possible to choose the channel. This i couldn't before that either

 

[Snowwolf]

Here are few photos of how it can be changed, perhaps iOS is different to other software?

 

[Snowwolf]

 

[randyandy]

Thanks Snow, iOS is definitly different to the Android menu.
Does anybody use here the P4 Pro with Android? I would be very pleased if someone can confirm that issue.
I use a Samsung Galaxy S6 Edge+, maybe someone uses the same setup?

 

[randyandy]

Problem solved...
After downgrading the firmware and update again, the 2.4GHz are there.
Don't know what has been going on there but... It's software... That's all i have to say about that...

Anyway thanks for your help guys.

 

[CactusJackSlade]

Problem solved...
After downgrading the firmware and update again, the 2.4GHz are there.
Don't know what has been going on there but... It's software... That's all i have to say about that...

Anyway thanks for your help guys.

I have the same issue apparently... my 2.4 went away after upgrading

 

[CactusJackSlade]

OK, downgraded firmware, still nothing, upgraded back, still nothing.... it's got to be the new version of the App.... is there an old version of the 4.0.0 app I can download somewhere?

 

[CactusJackSlade]

Only after going back to app version 4.0.0 did I get the ability to switch from 2.4 to 5.8 manually.... did DJI do this intentionally? I found the old version here:

DJI GO 4 4.0.0 (1000002) APK Download by DJI TECHNOLOGY CO., LTD - APKMirror

 

[randyandy]

I'm using 4.0.1 and it works.

Sent from my SM-G928F using PhantomPilots mobile app

 

[CactusJackSlade]

I'm using 4.0.1 and it works.

Sent from my SM-G928F using PhantomPilots mobile app

Very strange....