• Advertisement

Advanced search

LED signals with NAZA and IOC

Discuss the DJI Phantom Vision Camera and FPV System

Moderators: Adam, gunslinger, DeweyAXD, Geert, BenDronePilot

LED signals with NAZA and IOC

Postby MikeON » Tue Nov 19, 2013 6:43 am

I upgraded to latest firmware, software, and app. Enabled Naza-M and IOC. Got the warning that the LEDs will display flight status according to Naza-M instead of PV2 indicator. While it's been too windy to fly for several days, I see a variety of signals flashing when I flip the switches, and when I start it outside (presumably with GPS) vs. inside. Can anyone provide a list of what the Naza-M LED indications mean? Is this perhaps in the original Phantom (not Vision) documentation somewhere?
Thanks.
MikeON
 
Posts: 107
Joined: Tue Nov 05, 2013 9:16 am
Location: Pennsylvania, USA

Advertisement

Re: LED signals with NAZA and IOC

Postby Pull_Up » Tue Nov 19, 2013 6:50 am

http://wiki.dji.com/en/index.php/Phanto ... escription

That's the NAZA status LED crib sheet as it applies to the original Phantom - I'm fairly sure that's what you get if you enable NAZA mode on the Vision.
User avatar
Pull_Up
 
Posts: 3674
Joined: Tue Nov 05, 2013 7:13 am
Location: South Oxfordshire, UK

Re: LED signals with NAZA and IOC

Postby MikeON » Tue Nov 19, 2013 6:53 am

Excellent. Thanks lot.
MikeON
 
Posts: 107
Joined: Tue Nov 05, 2013 9:16 am
Location: Pennsylvania, USA

Re: LED signals with NAZA and IOC

Postby JustJames » Tue Nov 19, 2013 11:03 pm

Pull_Up wrote:http://wiki.dji.com/en/index.php/Phantom-LED_Indicator_Description

That's the NAZA status LED crib sheet as it applies to the original Phantom - I'm fairly sure that's what you get if you enable NAZA mode on the Vision.


Awesome thanks! I was wondering the same thing.

James
User avatar
JustJames
 
Posts: 276
Joined: Sat Nov 02, 2013 11:46 pm

Re: LED signals with NAZA and IOC

Postby Iceman » Wed Nov 20, 2013 7:02 pm

Nice link going to print one off
Phantom 2 / zenmuse hd-2 gimbal / gopro 3 / immersion rc vtx / mini osd / dji 2.4 datalink / fatshark dominator / black pearl monitor & fatshark cloverleaf & patch antennas

Phantom 2 with hd-3 full set up as above

Phantom V1.1.1 full set up
Iceman
 
Posts: 90
Joined: Tue Jul 16, 2013 6:03 pm
Location: Cambridgeshire , uk

Re: LED signals with NAZA and IOC

Postby Dave Pitman » Wed Nov 20, 2013 7:22 pm

Guys...Really?

That graphic containing the led status indication is included in the Phantom Quick Setup Guide, and the Naza M Quick Setup Guide. By your reactions, you have not read either? Really? :shock:
User avatar
Dave Pitman
 
Posts: 234
Joined: Sat Nov 02, 2013 7:56 pm
Location: Olympic Peninsula USA

Re: LED signals with NAZA and IOC

Postby MikeON » Wed Nov 20, 2013 9:46 pm

This the Phantom Vision forum. Neither the manual nor the quick start guide that came with my Vision have the requested information. I had read both several times. Just checked the latest (1.04) version of the manual and it still isn't there. The LED indications given in the Vision manual are not correct once NAZA and IOC are enabled.
Thanks again to Pull_Up for the post that was very helpful to many of us.
MikeON
 
Posts: 107
Joined: Tue Nov 05, 2013 9:16 am
Location: Pennsylvania, USA

Re: LED signals with NAZA and IOC

Postby Driffill » Wed Nov 20, 2013 9:54 pm

The led sequence is subject to changing too, so for example, if I had have gotten a copy of the led sequences, by now they would be different anyway. Best practice is to double check on DJI's web page after each FW update is released
Driffill
 
Posts: 529
Joined: Fri Jun 14, 2013 6:01 am

Re: LED signals with NAZA and IOC

Postby BManCan » Wed Nov 20, 2013 11:07 pm

justsomeguy wrote:
These manuals are so confusing for the lazy folks!

http://download.dji-innovations.com/dow ... art_en.pdf

--See page 4 section 8

http://download.dji-innovations.com/dow ... .04_en.pdf

--See page 26

Really, this should not be confusing to anyone that is blessed with even close to normal intelligence.


The links you have provided are for the Vision flying in standard Phantom Vision mode. Once you switch to NazaM mode, the lights behave differently than what is described in the PV manuals. The original poster has asked a very valid question, and it does not warrant lazy or RTFM comments.
BManCan
 
Posts: 72
Joined: Fri Nov 01, 2013 7:23 pm

Re: LED signals with NAZA and IOC

Postby pault » Fri Jan 31, 2014 5:27 am

Has it been definitively established that the indicator light sequences are indeed the same as the original Phantom in NAZAM mode ?
Sailed in the Tall Ships Race on Storyline ? http://www.facebook.com/YachtStoryline
pault
 
Posts: 567
Joined: Sat Jan 04, 2014 5:19 am
Location: Liverpool UK

Next


  • Advertisement

Return to DJI Phantom Vision

Who is online

Users browsing this forum: No registered users and 6 guests

  • Advertisement