Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Zenmuse & Immersion TX

Discussion in 'General Discussion' started by Ali in Austria, Sep 26, 2013.

  1. Ali in Austria

    Joined:
    Mar 20, 2013
    Messages:
    69
    Likes Received:
    2
    Where do you guys mount your Video TX when you have the Zenmuse Gimbal installed?

    Any advice appreciated.

    thanks :D
     
  2. MKheng

    Joined:
    Jun 30, 2013
    Messages:
    134
    Likes Received:
    0
    Re: Zenmuse & Immersion TX

    I've got mine velcro'd to the outside and drilled a slot in the shell to get the cables inside.
     
  3. BruceTS

    Joined:
    Jun 8, 2013
    Messages:
    304
    Likes Received:
    3
    Location:
    Granada Hills CA
    You want the TX mounted outside, those things get quite warm and need the cooling.
     
  4. blackd1964

    Joined:
    Aug 13, 2013
    Messages:
    55
    Likes Received:
    1
    I purchased the carbon fibre mount plate mentioned in the following post , the TX hangs out of the back and is more effective when the quad if flying back towards you with less drop outs. If you only mount the video TX on the top then the phantom LED isn't obscured. I use a velcro strap and the provided velcro strips.

    http://www.phantompilots.com/viewtopic.php?f=4&t=1448


    -----------------------
    http://www.quadsandsods.com
     
  5. Ali in Austria

    Joined:
    Mar 20, 2013
    Messages:
    69
    Likes Received:
    2