Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Won't fly after Flytrex

Discussion in 'Phantom 2 Vision Help' started by Icarus01, May 9, 2015.

  1. Icarus01

    Joined:
    Apr 9, 2015
    Messages:
    7
    Likes Received:
    0
    I installed Flytrex Core 2 on P2V and now the bird won't start up. I have good wifi connection 9 satellites but no red lights on the forward arms and she won't start up....
    Any suggestions on where to start?
     
  2. marg2

    Joined:
    Dec 9, 2014
    Messages:
    355
    Likes Received:
    27
    where did you connected the Flytrex cables at? some videos says the esc is ok,but i dont like it Mine is at the main power supply
     
  3. Icarus01

    Joined:
    Apr 9, 2015
    Messages:
    7
    Likes Received:
    0
    The cable went between the GPS antenna and the board. It's the Core 2 so it didn't need power. I updated the bird firmware and recalibrated the pilot and it starts up now. It was bit late to fly so I have to wait for that but it's at least starting and powering up now.