Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Will Lever Kit Work

Discussion in 'Phantom 2 Vision Discussion' started by barkster, Jan 29, 2014.

  1. barkster

    Joined:
    Jan 21, 2014
    Messages:
    6
    Likes Received:
    0
    I bought a lever kit to install on my transmitter and I did and it doesn't tilt camera. I even tried turning the pot back and forth and it doesn't do anything. Is the only way to control the tilt with the camera interface?
     
  2. gfredrone

    Joined:
    Jan 24, 2014
    Messages:
    1,221
    Likes Received:
    191
    With the stock gimbal yes only from phone. DJI has it turned off per dronexpert. His board attached to his gimbal give it the ability to tilt with the 7th channel if I understand correctly.
     
  3. barkster

    Joined:
    Jan 21, 2014
    Messages:
    6
    Likes Received:
    0
    man I hope someone else comes along with a cheaper gimbal than his. I can't believe they didn't do that out of the box. I love my vision but video is not stable like with a gimbal. Anyone know if you can put a zenmuse gimbal on it and still get fpv?
     
  4. urgno

    Joined:
    Nov 18, 2013
    Messages:
    237
    Likes Received:
    1
    Location:
    near Venice - Italy
    i guess should be possible to move the servo cable of the camera to the channel corresponding to the back lever
    but you will loose the tilt from the smartphone

    to have both a channel mixer should be enough and also some play with limits :roll:
    http://www.servocity.com/html/servo_mixer.html