Threaded nut insert for P3S tablet mount mod

[phantom3intennessee]

For those of you who have done it, what did you use to mount the tablet holder? Did you use the $10 aluminum nutsert from phantom help or amazon? Would this part work:
Oben 3/8"-16 to 1/4"-20 Reducer Bushing OB-1039 B&H

 

[phantom3intennessee]

This is the other one i was talking about Amazon.com: Allstar Performance ALL18548 Aluminum Threaded Nut Insert, 2 Pack: Automotive

 

[Grandpa Don]

If your mounting a Tablet holder on you P3S controller, you won't need this bushing. Just drill the hole properly and it will fit nicely. I didn't use the bushing even though I bought one. There are some good videos on YouTube on how to drill the hole.

 

[dirkclod]

Here's one. I did use a nutsert with mine just to have more meat in the TX so to speak but works ether-way . I over do things .

There are many more .

 

[Grandpa Don]

Yes, that is a good video. Just be sure to mark the hole behind the mounting pin as shown.

 

[msinger]

This is the other one i was talking about Amazon.com: Allstar Performance ALL18548 Aluminum Threaded Nut Insert, 2 Pack: Automotive

If you don't need two of these, you can get one from me here.

 

[phantom3intennessee]

If you don't need two of these, you can get one from me here.

I certainly didn't need 2 but I never could find the nutsert on your page. Maybe it's because I'm on mobile right now but it's a very long list and I didn't see the nut.

 

[msinger]

I'm on mobile right now but it's a very long list and I didn't see the nut.

I only have it linked here:
HOW TO: Install tablet mount on a Phantom 3 Standard remote controller | Phantom Help