Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

standard servo to tilt camera

Discussion in 'General Discussion' started by reALIGNed, Jul 2, 2014.

  1. reALIGNed

    Joined:
    Dec 20, 2013
    Messages:
    187
    Likes Received:
    0
    Location:
    S.E. Wisconsin
    I have a Phantom 1.1.1, I use a GoPro and I'm wondering if I can simply use a servo and a link rod to tilt the camera up and down using the stock tx. I don't care for a gimbal but I do want to tilt the camera. Can anyone offer some suggestions as to what port I can plug into on the NAZA etc. Is it "F2", and I already have the tilt control lever on the back of the tx. Thanks
    __________________
     
  2. reALIGNed

    Joined:
    Dec 20, 2013
    Messages:
    187
    Likes Received:
    0
    Location:
    S.E. Wisconsin
  3. kydan

    Joined:
    Feb 23, 2014
    Messages:
    440
    Likes Received:
    4
    Location:
    Chattanooga, TN
  4. reALIGNed

    Joined:
    Dec 20, 2013
    Messages:
    187
    Likes Received:
    0
    Location:
    S.E. Wisconsin
    That's what I'm assuming (it will work), but I wonder if the servo will harm anything vs a small gimbal motor.
     
  5. npalen

    Joined:
    Mar 12, 2014
    Messages:
    532
    Likes Received:
    8
    Location:
    Kansas
    Are the gimbal motors servo or stepper type?
     
Loading...
Similar Threads - standard servo tilt Forum Date
DJI Phantom III standard. Gimbal overload. Standard/4k Discussion Today at 2:00 AM
Is it possible to link P3 Standard Controller to P3 4k Drone? Standard/4k Discussion Yesterday at 3:13 PM
Standard Should i buy Dji Phantom 3 Standard? Phantom 3 Help Friday at 5:08 PM
Phantom 3 standard General Discussion Thursday at 10:45 PM
SOLD - Phantom 3 Standard (Practically New) Classifieds Wednesday at 4:58 PM