Scared need to update 1.1.9+

All upgrades on RC and bird and no problems. PSP Advanced


Sent from my iPhone using PhantomPilots mobile app
 
$2,634', Was that the money shot? ;-)

RedHotPoker
That was actually a typo -- I don't like using tablets or phones for typing for that very reason.

My maximum distance was 2,634 feet which was a record for me.

I have never had issues with completing any updates or with the firmware after an update. But I am not one to fly too far as if my P3A goes down it could be a challenge to find it. Am I too cautious? Perhaps. However if I still have the same aircraft next year then my thoughts are that I would rather be cautious. [emoji4]


Sent from my iPad using PhantomPilots mobile app
 
I think that that's actually a reasonably good distance travelled, and that you should be proud of that. I know some guys love to brag about how many miles out they have gone and often over deep water, and that's awesome for them, and within their comfort level. You know, it's not up to anyone else to talk down or denigrate what others have accomplished in their piloting endeavors. These models aren't cheap, and losing one, would definitely be devastating for many here. Me included.

RedHotPoker
 
  • Like
Reactions: pomonabill220
I think that that's actually a reasonably good distance travelled, and that you should be proud of that. I know some guys love to brag about how many miles out they have gone and often over deep water, and that's awesome for them, and within their comfort level. You know, it's not up to anyone else to talk down or denigrate what others have accomplished in their piloting endeavors. These models aren't cheap, and losing one, would definitely be devastating for many here. Me included.

RedHotPoker
Me too! and that is why I spent the cash... to be able to enjoy the hobby. No need to brag!
I am not out to prove a point, just have fun!
 
To get bugs fixed like the wavy horizon you put up with in 1.1.9
Or to use new features like POI that came with 1.4

Never fly so well like on 1.1.9....and at least, din´t fall with esc failure (new P3 with 8 fligts)..and last fw from DJI regards.

Opinions....
 
Wo
FYI that all of the old firmware is available directly from DJI.

May 30, 2019 Update:
DJI had been officially providing a tweaked FW version (1.11.30) on a case by case basis to select users who say they saw ESC issues after the update to 1.11.20.
Now it also seems that DJI has been using v1.11.30 when refurbishing units and not letting buyers know about it. If you buy a refurb it may come with v1.11.30 already installed.
The tweaked version (1.11.30) can be found if you search for it, but it won't be directly from DJI so I haven't included it here. In fact, DJI routinely tells people that there is no such thing as v1.11.30 which is totally false.


July 14, 2017 Update:
There have been reports that DJI may begin removing what they consider to be "hackable" firmware versions off their servers to make hacks less accessible. It may become hit or miss which firmware versions are still downloadable directly from DJI, though so far there have been no reports of broken links.

July 7, 2017 Update:
FW 1.11.20 introduced significant flight distance restrictions that need to be removed. Click here to read about it, get some of the background, and how to remove the restrictions.

November 29, 2016 Update:
With v1.10 and later DJI removed the ability to easily downgrade by one version via official means.


April 8, 2016 Update:
AC FW 1.8 and RC FW 1.6 were released together with an encryption change. If you have one (or later), you must have the other (or later) or you will have issues.


April 2, 2016 Update:
Since I posted these links a few days ago, they have now also been added to the Phantom Help site. If you prefer to get these exact links from that site instead, click here for P3A or here for P3P.


Advanced
[Release notes are here: P3A release notes]
[v1.4.1 and later are for the AC only. After that version, the RC is updated via the app only]

https://dl.djicdn.com/downloads/phantom_3/20170706/P3A_FW_V01.11.0020.bin.zip

https://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.10.0090.zip

https://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.09.0060.zip

https://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.08.0080.zip

** FW 1.7.6 and earlier are the old encryption. RC must be below v1.6.

http://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.07.0060.zip

http://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.06.0040.zip

http://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.05.0030.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.4.0010__en.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.3.20__en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.2.8_en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.2.7_en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.1.9_en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.1.8_en.zip


Pro
[Release notes are here: P3P release notes]
[v1.4.1 and later are for the AC only. After that version, the RC is updated via the app only]

https://dl.djicdn.com/downloads/phantom_3/20170706/P3P_FW_V01.11.0020.bin.zip

https://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.10.0090.zip

https://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.09.0060.zip

https://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.08.0080.zip

** FW 1.7.6 and earlier are the old encryption. RC must be below v1.6.

http://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.07.0060.zip

http://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.06.0040.zip

http://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.05.0030.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Professional_Firmware_v1.4.0010__en.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Professional_Firmware_v1.3.20__en.zip

http://download.dji-innovations.com...Phantom_3_Professional_Firmware_v1.2.6_en.zip

http://download.dji-innovations.com...Phantom_3_Professional_Firmware_v1.1.9_en.zip

http://download.dji-innovations.com...Phantom_3_Professional_Firmware_v1.1.8_en.zip
what one is for 1.8 firmeware for phanton 3 pro as can see a couple 1.8
 
Last edited:
FYI that all of the old firmware is available directly from DJI. Scroll past the update notes (shown in red) to get to the links. The P3A links are first and further down are the P3P links.

May 30, 2019 Update:
DJI had been officially providing a tweaked FW version (1.11.30) on a case by case basis to select users who say they saw ESC issues after the update to 1.11.20.
Now it also seems that DJI has been using their tweaked versions (1.11.30) when refurbishing units and not letting buyers know about it. If you buy a refurb it may come with v1.11.30 already installed. The tweaked version (1.11.30) can be found if you care to search for it since a few people have posted a link to it on MediaFire. Since that link is not directly from DJI, I haven't included it here. Note that some uninformed DJI reps tell people that there is no such thing as v1.11.30 which is totally false.


July 7, 2017 Update:
FW 1.11.20 introduced significant flight distance restrictions that need to be removed. Click here to read about it, get some of the background, and how to remove the restrictions.

November 29, 2016 Update:
With v1.10 and later DJI removed the ability to easily downgrade by one version via official means.


April 8, 2016 Update:
AC FW 1.8 and RC FW 1.6 were released together with an encryption change. If you have one (or later), you must have the other (or later) or you will have issues.


April 2, 2016 Update:
Since I posted these links a few days ago, they have now also been added to the Phantom Help site. If you prefer to get these exact links from that site instead, click here for P3A or here for P3P.


P3A (Advanced)
[Release notes are here: P3A release notes]
[v1.4.1 and later are for the AC only. After that version, the RC is updated via the app only]

https://dl.djicdn.com/downloads/phantom_3/20170706/P3A_FW_V01.11.0020.bin.zip

https://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.10.0090.zip

https://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.09.0060.zip

https://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.08.0080.zip

** FW 1.7.6 and earlier are the old encryption. RC must be below v1.6.

http://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.07.0060.zip

http://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.06.0040.zip

http://dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.05.0030.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.4.0010__en.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.3.20__en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.2.8_en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.2.7_en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.1.9_en.zip

http://download.dji-innovations.com/downloads/phantom_3/en/Phantom_3_Advanced_Firmware_v1.1.8_en.zip


P3P (Pro)
[Release notes are here: P3P release notes]
[v1.4.1 and later are for the AC only. After that version, the RC is updated via the app only]

https://dl.djicdn.com/downloads/phantom_3/20170706/P3P_FW_V01.11.0020.bin.zip

https://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.10.0090.zip

https://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.09.0060.zip

https://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.08.0080.zip

** FW 1.7.6 and earlier are the old encryption. RC must be below v1.6.

http://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.07.0060.zip

http://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.06.0040.zip

http://dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.05.0030.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Professional_Firmware_v1.4.0010__en.zip

http://dl.djicdn.com/downloads/phantom_3/en/Phantom_3_Professional_Firmware_v1.3.20__en.zip

http://download.dji-innovations.com...Phantom_3_Professional_Firmware_v1.2.6_en.zip

http://download.dji-innovations.com...Phantom_3_Professional_Firmware_v1.1.9_en.zip

http://download.dji-innovations.com...Phantom_3_Professional_Firmware_v1.1.8_en.zip
Which download is used for Phantom 3 SE
 
The SE is so confusing when buying parts. Or stuff like this. Is there a place to get this firmware
 
The SE is so confusing when buying parts. Or stuff like this. Is there a place to get this firmware
I don't have an SE, but since you do I assume you know that the FW is updated via the app similar to the P3S.
Even so, I have seen a few links to SE FW posted here and there, though as noted I don't have an SE so don't know the various versions or their ages.


If you edit the FW numbers in the links, you may be able to get other versions. I haven't tried. I also don't know how you'd use the files to update an SE.
Good luck!
 
  • Like
Reactions: JbroDrone
Hi All, was wondering if there was a link to download firmware for phantom 3 SE (special edition) . one of my clients bricked his main board
I want to try a forced update from the SD card , I've done it on the standard, but can't find a download online for the SE
 
Hi All, was wondering if there was a link to download firmware for phantom 3 SE (special edition) . one of my clients bricked his main board
I want to try a forced update from the SD card , I've done it on the standard, but can't find a download online for the SE
Quick search on the net and I come up with this.but no firmware mentioned??
It would seem that there has been no new firmware release for this drone - all information on it is available here.
Bit more info....
 
Last edited:
Hi All, was wondering if there was a link to download firmware for phantom 3 SE (special edition) . one of my clients bricked his main board
I want to try a forced update from the SD card , I've done it on the standard, but can't find a download online for the SE
Have you tried the link to v1.5.40 in post 31 (three posts above yours) in this very thread?
 
Last edited:
  • Haha
Reactions: JoBe
hello guys, hello Oso i want to ask about several things related to firmware cause am having issues my go app is showing a corrupted video and a note that esc error restart plane if this continues contact dji the tx is on fw 1.8 and the ac is on 1.11.20 latest downloaded from dji site .to avoid a lot of questions first can i roll back from the 1.11.20 by the debug file method to fix my issues??
 
can i roll back from the 1.11.20 by the debug file method to fix my issues??
Rolling back from 1.11.20 is hit or miss. From what I gathered when reading the dozens (hundreds?) of posts about downgrading 1.11.20, it depends largely on which particular revision of P3P each person has. For example, early P3Ps have a OFDM board that causes problems. I have long cautioned about going to 1.11.20, so I don't have it installed and never will. The highest version I use on any of my P3s is v1.6.4. As such, I can't speak from personal experience. Only what I've read here in the forum since 1.11.20 came out I think in 2017.

Example about the revisions: Downgrading firmware on P3P from 1.10.9 to 1.7.6

You can read the later pages of this post for some info and links to other related posts.
 
Last edited:
  • Like
Reactions: JoBe
without knowing the facts ive came across once i owned this new p3p on how dji screwed the p3p awesome experience to tons of its users ,prior to that i never updated a p3 cause am satsfied with what i owned, but this time i had no choice this aircraft has gone an aborted fw update to version 1.11.20 , and that probably made a problem to gimbal board so i managed to flash the gimbal board again thanks to sunsetcatcher method and assistance of quad damage and cashmak diver so after that i had no choice but to continue the firmware update!! now i wonder if there are methods or mods to go around the restrictions like the things digdat0 and others make????? isnt the restriction zone a parameter that can be modded?? or i remember i passed by a site that shows how to make a custom dji go app wont that help get through the restrictions??? on fw1.11.20???
 
Last edited:
another question please on transmitter firmware, now to use 1.11.20 on aircraft the transmitter should be 1.9.2 and app on android 3.1.8 , my question is say i have another p3p on fw 1.8.80 would this 1.9.2 transmitter fly the 1.8.80 bird??
and hopfully the degrade sorry upgrade to 1.11.20 does not cause any issues for batteries???
 
Last edited:

Members online

No members online now.

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,935
Latest member
Pauos31