Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Revive a dead DJI battery with a lipo charger?

Discussion in 'Pro/Adv Discussion' started by Ed209, May 26, 2016.

  1. Ed209

    Joined:
    Jul 27, 2015
    Messages:
    938
    Likes Received:
    423
    I have a battery that was run down to 1% and is not charging. This battery is modded with XT60 and balance connectors. Cell voltage is:
    3.32
    3.27
    3.30
    3.28

    I believe the DJI battery isn't charging because some cells are below 3.30v. I tried to search here and I know it's been discussed but what is the procedure to try and revive using an aftermarket charger? I have a SkyRC D100. I also worked up this nice connector as well if it needs to charge through the DJI ports and not the XT60. I tried charging in NiMH mode after turning the battery on but no dice. Anyone have any info? I know all the risks and I have a safe spot to charge. ;)

    [​IMG]
     
    Digdat0 likes this.