Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Range problems starting from nothing?

Discussion in 'Standard/4k Discussion' started by ftomas, Sep 7, 2016.

  1. ftomas

    Joined:
    Jun 29, 2016
    Messages:
    90
    Likes Received:
    6
    I have the P3S from June
    Firmware 1.6.8, from middle august with paptita mod to 22dbm

    Allways had good range and no near RC/Drone connections issues
    Exemple: Middle august 2 km
    HealthyDrones.com - Innovative flight data analysis that matters

    last good flight on 03-09-2016 - 16min of flight 3 - Mode changed to WiFi_Reconnect
    HealthyDrones.com - Innovative flight data analysis that matters

    Beginning from 5-9-2016 i have RC connection issues...no firmware / hardware changes
    too many Mode changed to WiFi_Reconnect
    HealthyDrones.com - Innovative flight data analysis that matters
    HealthyDrones.com - Innovative flight data analysis that matters
    HealthyDrones.com - Innovative flight data analysis that matters

    I see on healthydrones General/notifications to many Mode changed to WiFi_Reconnect
    same time sensors/signal map gives all green.

    I don't known exactly what signal map means, but i suppose it is calculated with signal losses...
    The problem here appears to be the link from RC to Drone that is dropping... but why?

    Yesterday i had the RC and drone 1 meter away (from each other) on my desk and DGI GO was always changing from good to strong interference... i was 1 meter away from my router but they were so close...


    any ideas???
     
    #1 ftomas, Sep 7, 2016
    Last edited: Sep 7, 2016