Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Problem Keeping Transmitter Bound

Discussion in 'Phantom 1 Help' started by gdclark2, Mar 19, 2014.

  1. gdclark2

    Joined:
    Jul 17, 2013
    Messages:
    2
    Likes Received:
    0
    I have a Phantom 1 with the Naza M (Red Decal) and my transmitter quit working, so I ordered a dual antenna receiver and a DJ6 transmitter to replace on my Phantom. I can get the receiver to bind to the transmitter and the green solid light remains on the board and everything works great. But then I turn off the craft and the transmitter and when I power them both back up, I have to rebind the transmitter to the receiver. I've gotten everything to work, but just can't seem to keep the transmitter and receiver to stay bound to each other and would hate to have to bind them everytime I power everything down and back up again. Anyone know a remedy or had the same situation?
     
  2. nintendrone64

    Joined:
    Feb 19, 2014
    Messages:
    353
    Likes Received:
    2
    Location:
    Simi Valley, CA

    Your best bet is going to be to buy a new remote controller.
    If that's still not working, I think it's time to get a new Phantom (or at least send it in to some pros).
     
  3. gdclark2

    Joined:
    Jul 17, 2013
    Messages:
    2
    Likes Received:
    0
    The transmitter and receiver are brand new... And I have a new P2V, I just have a different setup on this craft.
     
  4. semacie

    Joined:
    Jun 23, 2014
    Messages:
    1
    Likes Received:
    0
    gdclark, I am having the same problem were you able to find a solution to keeping the transmitter and receiver bound after power down?

    Crossing my fingers that you did :cry:
     
  5. discv

    Joined:
    May 7, 2013
    Messages:
    619
    Likes Received:
    26
    Location:
    London, UK
    Helipal have a faulty batch of dual antenna Rx's. I've just had this same binding problem.

    Helipal could not find one that would work- and they sent me a DR16 instead :D