Phantom vision camera servo or gimbal.

Soleangel said:
Hello.
I am in need of a vision camera servo (what makes it tilt up and down)
I screwed the screw in too tight and the little screw broke off and now I can't screw anything in there because it's stuck.
Anybody have one for sale or know were I can find one.?

I Really need it :(
https://www.flickr.com/photos/87240642@N06/14348327415/lightbox/

I think it's only sold with the complete camera unit. Can you drill it out or notch it with a dremel and back it out somehow? I have one, but I don't want to sell in case I remove my rotorpixel and go back to stock.

Thought about upgrading the gimbal? Now's your chance...
 
gfredrone said:
Soleangel said:
Hello.
I am in need of a vision camera servo (what makes it tilt up and down)
I screwed the screw in too tight and the little screw broke off and now I can't screw anything in there because it's stuck.
Anybody have one for sale or know were I can find one.?

I Really need it :(
https://www.flickr.com/photos/87240642@N06/14348327415/lightbox/

I think it's only sold with the complete camera unit. Can you drill it out or notch it with a dremel and back it out somehow? I have one, but I don't want to sell in case I remove my rotorpixel and go back to stock.

Thought about upgrading the gimbal? Now's your chance...

I need it :(
Can you please sell it to me.?lol
And as for the gimbal...I don't want to wait forever for a rotor pixel.
If there wasn't such a wait time I would've but I need it ASAP :/
 
Hello,
You don't need a new servo, just a new gear, I recently purchased a salt water damaged phantom vision, for parts, I have the servo, it is rusted tight, but gear is brass, and is ok,

Here is a picture:
074D0B26-5319-46C3-BF67-F9FE30F55A49_zpsrmgmh6mp.jpg


Another pic:
2CEB5CA7-6D73-4ECD-855F-CA64398B23DC_zps1jkjqfj2.jpg


You'll need to REMOVE 4 screws on bottom of servo
Pic:
634544B2-09D8-4914-ADDD-28DD286B790B_zpsa0e7jv6a.jpg


Carefully remove TOP cover

Pic:
3D233B92-5CD0-4D75-B809-18DE73190BDE_zps3vhuo0jv.jpg


Carefully remove gear assembly
Pic:
6C21BEA2-D2EA-43F4-9359-CFAE827C8A11_zpsmr5pp5jl.jpg


I've cleaned it a bit, came out nice
Pic:
CB943AB8-0AEC-4278-A495-57152A0561BB_zps4lg5l9nb.jpg


I have this if you need it, pm me your info?

Hope this helps

Take care, fly safe!
 
J Dot said:
Hello,
You don't need a new servo, just a new gear, I recently purchased a salt water damaged phantom vision, for parts, I have the servo, it is rusted tight, but gear is brass, and is ok,

Here is a picture:
074D0B26-5319-46C3-BF67-F9FE30F55A49_zpsrmgmh6mp.jpg


Another pic:
2CEB5CA7-6D73-4ECD-855F-CA64398B23DC_zps1jkjqfj2.jpg


You'll need to REMOVE 4 screws on bottom of servo
Pic:
634544B2-09D8-4914-ADDD-28DD286B790B_zpsa0e7jv6a.jpg


Carefully remove TOP cover

Pic:
3D233B92-5CD0-4D75-B809-18DE73190BDE_zps3vhuo0jv.jpg


Carefully remove gear assembly
Pic:
6C21BEA2-D2EA-43F4-9359-CFAE827C8A11_zpsmr5pp5jl.jpg


I've cleaned it a bit, came out nice
Pic:
CB943AB8-0AEC-4278-A495-57152A0561BB_zps4lg5l9nb.jpg


I have this if you need it, pm me your info?

Hope this helps

Take care, fly safe!

Yeah thanks.!
Inbox me.:)
 

Members online

No members online now.

Forum statistics

Threads
143,066
Messages
1,467,358
Members
104,936
Latest member
hirehackers