Phantom Radio Controller DJ6 2.4GHz and Receiver Upgrade

Joined
May 15, 2014
Messages
675
Reaction score
8
Age
74
Location
Tionesta, California
For folks who have an early version Phantom, V1, V1.1, V1.2, or any Phantom that currently has only 1 Antenna on the a leg I offer an Upgrade KIt that includes the DJ6 RC Transmitter Controller and a 2.4GHz Receiver that has 2 Antenna's.
If you have an FC40 or Vision that currently has a 5.8GHz Reciver and you want to swap it out to 2.4GHz this kit is for you.

This kit works in any Phantom or any build using a DJI Naza MC, either Yellow or Red Label. I provide support from the time of sale to the point where you are flying. I have lots of experience and lots of happy flying friends who have bought my kits.

Here is the 2.4GHz Recever and a DJ6 Transmitter with Gimbal Control and External USB.
http://www.ebay.com/itm/291277333111?ss ... 1555.l2649

Here is just the 2.4GHz Receiver:
http://www.ebay.com/itm/291275841483?ss ... 1555.l2649

Also I have a Tool Kit you might find handy but is not necessary if all you are doing is R&R the Receiver.
http://www.ebay.com/itm/291281264158?ss ... 1555.l2649

I will offer a 10% discount to Phantom Pilots members who wish to pay directly to my paypal account.

What is included in the Upgrade KIt is

1. DJ6 RC Transmitter with Gimbal Tilt control on the back. Range of up to 1000 meters.
2. DJI 2.4GHz 2 antenna receiver with screws included. Replaces the single antenna receiver inside the Phantom. Allows binding through the battery compartment without opening the shell
3. 2 Servo Cables to connect the Receiver to the Naza MC.
4. Tools that are necessary to open the shell and Remove and Replace the Receiver
5. Instructions to how to complete this process.

If you look at my Ebay listing and would rather get a 10% discount. Pay directly to my PayPal account minus exactly 10%. Contact me first and we will discuss the transaction. I ship really fast and it is impotant to me that this works for you and I will do whatever is necessary to make it work. I give out my phone number and will ship a replacement immediately if it is determined that something is not working. Typically we just to need to work out little things like being in D-Bus mode and after some simple fixes you are flying.

If any of the above interests you please PM me.
Thank you,
Craig
 
Wedeliver said:
For folks who have an early version Phantom, V1, V1.1, V1.2, or any Phantom that currently has only 1 Antenna on the a leg I offer an Upgrade KIt that includes the DJ6 RC Transmitter Controller and a 2.4GHz Receiver that has 2 Antenna's. Also I have a Tool Kit you might find handy!

http://www.ebay.com/itm/291277333111?ss ... 1555.l2649

I will offer a 10% discount to Phantom Pilots members who wish to pay directly to my paypal account.

What is included in the Upgrade KIt is

1. DJ6 RC Transmitter with Gimbal Tilt control on the back. Range of up to 1000 meters.
2. DJI 2.4GHz 2 antenna receiver with screws included. Replaces the single antenna receiver inside the Phantom. Allows binding through the battery compartment without opening the shell
3. 2 Servo Cables to connect the Receiver to the Naza MC.
4. Instructions to how to complete this process.

I also have a tool kit that would be handy to do the above job.

http://www.ebay.com/itm/291281264158?ss ... 1555.l2649

Again, 10% discount if you pay directly to my PayPal account

I suppose I should mention that I also have 8" Self Tightening Propellers

http://www.ebay.com/itm/291281475902?ss ... 1555.l2649

If any of the above interests you please PM me.
Thank you,
Craig

This is still available.
 
Wedeliver said:
For folks who have an early version Phantom, V1, V1.1, V1.2, or any Phantom that currently has only 1 Antenna on the a leg I offer an Upgrade KIt that includes the DJ6 RC Transmitter Controller and a 2.4GHz Receiver that has 2 Antenna's. Also I have a Tool Kit you might find handy!

http://www.ebay.com/itm/291277333111?ss ... 1555.l2649

I will offer a 10% discount to Phantom Pilots members who wish to pay directly to my paypal account.

What is included in the Upgrade KIt is

1. DJ6 RC Transmitter with Gimbal Tilt control on the back. Range of up to 1000 meters.
2. DJI 2.4GHz 2 antenna receiver with screws included. Replaces the single antenna receiver inside the Phantom. Allows binding through the battery compartment without opening the shell
3. 2 Servo Cables to connect the Receiver to the Naza MC.
4. Instructions to how to complete this process.

I also have a tool kit that would be handy to do the above job.

http://www.ebay.com/itm/291281264158?ss ... 1555.l2649

Again, 10% discount if you pay directly to my PayPal account

I suppose I should mention that I also have 8" Self Tightening Propellers

http://www.ebay.com/itm/291281475902?ss ... 1555.l2649

If any of the above interests you please PM me.
Thank you,
Craig
 
I have added a couple tools to my kit. A 2mm allen wrench to remove all those hex screws and a 0 Phillips screwdriver for both the screws on the end of the arms and the screws that secure the Receiver that is being removed and replaced. And just for fyi, the new 2.4GHz receiver that I sell comes with new screws!
 
For folks who have an early version Phantom, V1, V1.1, V1.2, or any Phantom that currently has only 1 Antenna on the a leg I offer an Upgrade KIt that includes the DJ6 RC Transmitter Controller and a 2.4GHz Receiver that has 2 Antenna's.
If you have an FC40 or Vision that currently has a 5.8GHz Reciver and you want to swap it out to 2.4GHz this kit is for you.

This kit works in any Phantom or any build using a DJI Naza MC, either Yellow or Red Label. I provide support from the time of sale to the point where you are flying. I have lots of experience and lots of happy flying friends who have bought my kits.

Here is the 2.4GHz Recever and a DJ6 Transmitter with Gimbal Control and External USB.
http://www.ebay.com/itm/291277333111?ss ... 1555.l2649

Here is just the 2.4GHz Receiver:
http://www.ebay.com/itm/291275841483?ss ... 1555.l2649

Also I have a Tool Kit you might find handy but is not necessary if all you are doing is R&R the Receiver.
http://www.ebay.com/itm/291281264158?ss ... 1555.l2649

I will offer a 10% discount to Phantom Pilots members who wish to pay directly to my paypal account.

What is included in the Upgrade KIt is

1. DJ6 RC Transmitter with Gimbal Tilt control on the back. Range of up to 1000 meters.
2. DJI 2.4GHz 2 antenna receiver with screws included. Replaces the single antenna receiver inside the Phantom. Allows binding through the battery compartment without opening the shell
3. 2 Servo Cables to connect the Receiver to the Naza MC.
4. Tools that are necessary to open the shell and Remove and Replace the Receiver
5. Instructions to how to complete this process.

If you look at my Ebay listing and would rather get a 10% discount. Pay directly to my PayPal account minus exactly 10%. Contact me first and we will discuss the transaction. I ship really fast and it is impotant to me that this works for you and I will do whatever is necessary to make it work. I give out my phone number and will ship a replacement immediately if it is determined that something is not working. Typically we just to need to work out little things like being in D-Bus mode and after some simple fixes you are flying.

If any of the above interests you please PM me.
Thank you,
Craig
I have a p2 an I cant get the controler to bind with the reciver I flew it but for some reason i lost the binding between the two
 

Recent Posts

Members online

Forum statistics

Threads
143,086
Messages
1,467,526
Members
104,965
Latest member
Fimaj