Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Phantom LHS leg shows up in video with Zenmuse..

Discussion in 'Zenmuse H3-2D GoPro Gimbal' started by tomtom123, Oct 1, 2013.

  1. tomtom123

    Joined:
    Aug 31, 2013
    Messages:
    5
    Likes Received:
    0
    Hi

    When i have my gopro tilting directly down i can see the LHS leg in most shots. Does anyone know how to prevent this?

    Thanks,
    Tom
     
  2. lilwheat

    Joined:
    May 13, 2013
    Messages:
    94
    Likes Received:
    0
    Are you flying in GPS mode? I noticed that when I was in GPS mode and the Phantom was correcting itself, the leg would tilt into the shot whenever there was a gust of wind that it had to counter.
     
  3. The Editor

    Joined:
    Aug 7, 2013
    Messages:
    568
    Likes Received:
    7
    Switch to Med or Narrow FOV. Zoom in slightly in post or don't point it directly down when it's windy (this is when it shows the most as the Phantom tilts sideways to correct it's position)

    If you know you are going to take a shot with wide FOV and straight down try to position the Phantom nose into the wind, that way the correction will move the leg out of shot but to be honest the best way is a slight zoom on Wide or shoot in Medium FOV
     
  4. tomtom123

    Joined:
    Aug 31, 2013
    Messages:
    5
    Likes Received:
    0
    Thank you for your help. All your suggestions make a lot of sense.

    Any other suggestions please post:)

    Tom