Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Standard Phantom 3 4K Edition

Discussion in 'Phantom 3 Help' started by Stanley Fredriks, Jan 16, 2016.

  1. Stanley Fredriks

    Joined:
    Jan 14, 2016
    Messages:
    19
    Likes Received:
    2
    In depth about the problem I have with my new phantom 3 4K edition. I bought my p3 7.1.2016. When I'm unboxing I charged my battery first. After that install. DJI Go app (iOS) iPhone 6s. The first advice was that I have imu calibration before I start with my first flight. Okey I put my phantom without the battery in PS3 in cold tempature I'm living in Finland outside is -10. Okey after 10min is my phantom cool down go back inside. Put my battery in the p3 turn on my controller and start my go app. Turn my p3 on start imu calibration. But after 15 or 45 min. Nothing's going to happen. The progress bar still 0% not going to 100% to finish. All info x,y,z,mode are empty 0. I try many times without success, is there something wrong with my phantom? There is no firmware update coz this bird is new released in January.

    If u have any suggestions pls let me know thank you;) image.jpeg
     
  2. Meta4

    Meta4 Moderator
    Staff Member

    Joined:
    Jan 8, 2014
    Messages:
    7,759
    Likes Received:
    3,467
    Have you activated the Phantom (registered with DJI) yet?
    You can't do anything until the Phantom is activated
     
  3. Stanley Fredriks

    Joined:
    Jan 14, 2016
    Messages:
    19
    Likes Received:
    2
    I did activated my bird DJI go app first time. But I didn't get confirm link to my email. That is been activated. And in my DJI account I not see my bird and s/n.