Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Phantom 2 Vision + Gimbal Concern

Discussion in 'Phantom 2 Vision + Discussion' started by Wildcat_1, Nov 17, 2015.

  1. Wildcat_1

    Joined:
    Dec 8, 2014
    Messages:
    7
    Likes Received:
    0
    Hi there
    I just powered up my Vision+ for the first time in about 6 months. Did the FW upgrades etc and noticed that I cannot control vertical movement of the camera from the RC or the App at this time. The gimbal powers up (straightens up) and lights the Gimbal green without issue. Also when I move the sticks left and right you see it do its compensation thing but on the ground here I cannot control movement with the RC dial or the App slider. I am also noticing when I power off it doesn't droop down like it used to.

    Any thoughts on what might be wrong here as I would love to get it out and flying again

    Thanks

    WC
     
  2. Wildcat_1

    Joined:
    Dec 8, 2014
    Messages:
    7
    Likes Received:
    0
    Well that was weird. Went into the Phantom App on the computer and re-calibrated the X1 and bingo working again. With that said I am still not seeing the droop (camera pointing down) when turning off any more and occasionally I am seeing the gimbal obstruction error which then clears itself