Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

P3s camera - flickery/laggy/noisy recorded video / HELP

Discussion in 'Standard/4k Discussion' started by 250Flyer, Feb 3, 2016.

  1. 250Flyer

    Joined:
    Dec 1, 2015
    Messages:
    274
    Likes Received:
    26
    Location:
    United Kingdom
    I seem to have a problem with videos shot with my p3s camera...the recorded video always seems flickery/noisy and not crisp enough... Like there's too much going on, I only record on 1080p.

    To put it better, it's a bit like when you try to record a PC monitor or TV and the camera picks up that minor flicker on your camera's monitor.

    I have gone through the manual camera and auto settings, low ISO seems to help a little but the video seems noisy like a white noise but the shot is not over exposed neither is the ISO set above 400-800 in daylight.

    The FPV live feed seems to be ok. It's just the recorded clip that seems noisy/ shutter flicker.

    Would this be some kind of shutter flicker setting causing problem?

    Today it was over-cast but lit enough and ISO was set to 400 and shutter set to 30 (max) when I watched the video back it seemed noisy with shutter flicker in the recorded clip?

    Sorry it goes on a little
     
  2. 250Flyer

    Joined:
    Dec 1, 2015
    Messages:
    274
    Likes Received:
    26
    Location:
    United Kingdom
  3. msinger

    Approved Vendor

    Joined:
    Oct 30, 2014
    Messages:
    18,962
    Likes Received:
    5,582
    Location:
    US
    Please post a sample video so we can see what you're describing.
     
  4. 250Flyer

    Joined:
    Dec 1, 2015
    Messages:
    274
    Likes Received:
    26
    Location:
    United Kingdom
    I will get a clip up tomorrow, it is late now almost 4 am.

    Thanks for your reply.

    Please see my latest thread if you wouldn't mind :)