Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

P3P 4k .. Camera sees landing gear

Discussion in 'Pro/Adv Discussion' started by gobblinfool, Feb 26, 2016.

  1. gobblinfool

    Joined:
    Feb 21, 2016
    Messages:
    5
    Likes Received:
    2
    During flight, I can see the left side landing gear in the camera. How do I adjust the camera so this doesnt happen?
     
    dynamic3dSolutions likes this.
  2. Mal_PV2_Ireland

    Joined:
    Mar 4, 2014
    Messages:
    2,589
    Likes Received:
    1,230
    Location:
    Dublin Ireland
    If you fly less aggressively you shouldnt see your landing gear or props
     
  3. gobblinfool

    Joined:
    Feb 21, 2016
    Messages:
    5
    Likes Received:
    2
    there was nothing aggressive about the flying.. I just think the camera is off centered
     
  4. Mal_PV2_Ireland

    Joined:
    Mar 4, 2014
    Messages:
    2,589
    Likes Received:
    1,230
    Location:
    Dublin Ireland
    Have you tried a gimbal calibration in the app. When you have it on a flat surface and you look straight at the camera does it look centred?
     
  5. dynamic3dSolutions

    Joined:
    Nov 5, 2015
    Messages:
    68
    Likes Received:
    15
    Location:
    Northern Mich
    There is a gimbal calibration button in the app that will calibrate your gimbal & camera and should correct it. Make sure your phantom is level when you do.
     
  6. gobblinfool

    Joined:
    Feb 21, 2016
    Messages:
    5
    Likes Received:
    2
    great. . thanks. . I'll give that a try later