Got my P3S and can not get it the Remote Controller to Link with the iPad or DJI Go, have already done the relink procedure for the remote and the aircraft but can not get the RC controller to calibrate, the DJI Go Screen shows no connection and that is my big problem, getting the DJI Go to show a connection. Am using an iPad Air and it works perfect with the P3P but not with the standard. I did download the firmware update for the P3S standard when I was downloading the Go app for it. Here is one curious thing, whenever I turn it on, the aircraft, after the gimbal settles down I still get a three beeps, one short and then two beeps immediately after that. or it could be before the gimbal settles down, but the beeps I have never heard with the P3P. Wander if that is signaling a problem. Wifi on the iPad is set to the DJI one but seems to make no difference with the GO App. Any help really appreciated.