Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

P2V Gimbal not working

Discussion in 'Phantom 2 Vision Discussion' started by tmcclure95, Apr 4, 2014.

  1. tmcclure95

    Joined:
    Apr 4, 2014
    Messages:
    1
    Likes Received:
    0
    Hello,
    So I have a 2 Vision and the gimbal isn't working at all. When flying, it doesn't stabilize and the DJI app doesn't move it either. I've tried updating firmware but no luck. Any help would be appreciated.
     
  2. iDrone

    Joined:
    Nov 14, 2013
    Messages:
    612
    Likes Received:
    2
    Location:
    Los Angeles, California USA
    Possibly your Servo Cable isn't firmly connected... Have a look at 1:35 in the following video which shows the cable & connectors. It's located just above the camera gimbal servo which is housed in the white box immediately above the camera:
    [youtube]http://www.youtube.com/watch?v=obe_QqxuT-g[/youtube]
    http://youtu.be/obe_QqxuT-g
    iDrone ;)
     
  3. RCRookie

    Joined:
    Mar 9, 2014
    Messages:
    703
    Likes Received:
    11
    Location:
    East Texas
    Have you updated the firmware? Does your revision numbers match the info screen on the assistant? Has camera been updated?
    Do you have a green light on the camera? Let us know what is working and what is not working.