Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

P2 Vision gimbal controller board

Discussion in 'Phantom 2 Mods' started by CyberVet65, Aug 4, 2015.

  1. CyberVet65

    Joined:
    Dec 24, 2013
    Messages:
    117
    Likes Received:
    5
    Location:
    Cedar City, Utah
    Well I learned the hard way not to unplug the camera when powered up. Sparks and smoke leaking from valuable components..
    So where can I get a control board for a P2 Vision. The replacement board are not configured like the one I removed. Assembly date on the board is 2013. Not that old it has all the pins around the board and only one power lead soldered to the board.
    The replacement boards have a number plugs and not pins.
    Any idea where I can get a replacement?
    Thanks
     
  2. jason

    Joined:
    Oct 12, 2014
    Messages:
    4,099
    Likes Received:
    404
    Location:
    Commerce Twp,MI
    You would probably get more help and quicker response if you posted your question under P2v+ instead of here.
     
    #2 jason, Aug 4, 2015
    Last edited: Aug 5, 2015
  3. CyberVet65

    Joined:
    Dec 24, 2013
    Messages:
    117
    Likes Received:
    5
    Location:
    Cedar City, Utah
    Right. Thanks. I just realized the P2 Vision doesn't have a 2 axis gimbal. It is aftermarket and I bought the P2 used. Thanks