Hi Guys, Please have a read and let me know if it's something I can resolve, I am speaking to DJI and the people I bought it off but I thought broaden my options and seek the experts. I'm from Bonnie Scotland and I have just purchased a DJI Phantom 2 Vision + and it's awesome... or was... until well here's the story: To begin with all was working fine in standard mode using the SD card which came with the unit. I am using a HTC Sensation phone for my FPV. Then after a few successful flights the battery power indicator for the TX remote unit and the SD card indicator would not go green and remained grey in color meaning that they are not being recognized, although I had green lights for my WIFI connection and the green light on the TX remote for power was on and green. When I attempted to take photos or film video from a stationary point, the message would flash up NO SD CARD, I have tried using another device a Nexus 7 and another SD Card a high spec Sansdisk but still the problem remains. I can still move the camera and see what it sees but it will not take pictures or video. Please also note that in between these issues I have had the system running normally for brief periods (1-2 mins) then in returns to what would appear to be a malfunctioning state. Also for your information I have had no crashes. I think that I have a loose wire somewhere that is causing this sometimes intermiitent issue, it is flying ok but obviously I need full control. I have attached a picture to let you see what I see. Thanks for reading this and thanks in advance to anyone who take the time to reply. Kind Regards, Craig.