Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Not able to start vision

Discussion in 'Phantom 2 Vision Discussion' started by twonorth69, Nov 5, 2013.

  1. twonorth69

    Joined:
    Nov 5, 2013
    Messages:
    20
    Likes Received:
    7
    Location:
    New Jersey
    I tried to use my phantom vision today and when I tried to start it it would not start. I hook it up to the assist software all is in order. tried it again and i have a flashing yellow light, still wont start. HELP!!!
     
  2. Ital86

    Joined:
    Nov 5, 2013
    Messages:
    40
    Likes Received:
    0
    I had the same issue yesterday with mine. It was slow flashing green then when I went to start it by both sticks to the inside lower corners, I got a fast flashing red, followed by yellow. Turns out that I was just too close to the Vision. When I stepped away a few feet it started right up and flew perfect. I don't know if this was just coiincidental for me, but thought I would share.
     
  3. SRQphantom

    Joined:
    Nov 6, 2013
    Messages:
    7
    Likes Received:
    0
    I have same issue, only yellow lights. Transmitter has no connection to the phantom vision and I can't calibrate.