Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

No signal at 200m(600ft)

Discussion in 'Phantom 2 Vision + Discussion' started by Sebbeman, May 28, 2014.

  1. Sebbeman

    Joined:
    May 28, 2014
    Messages:
    1
    Likes Received:
    0
    Hi.
    I seem to have a problem with loosing rc signal. I live in Europe so was flying in EC mode and was loosing control at around 200-300 m. Then I switched to ECC mode. Still loosing signal going straight up to approx 250m.

    Any ideas if I'm doing anything wrong? What ranges should I be expecting?

    Thx
    ./Seb
     
  2. kgarrison

    Joined:
    May 5, 2014
    Messages:
    126
    Likes Received:
    0
    You mean FCC mode? Being in Europe I am pretty sure it is not legal to switch to FCC mode. In CE mode you are getting about the correct distance.
     
  3. happydays

    Joined:
    Jul 5, 2013
    Messages:
    1,852
    Likes Received:
    660
    Location:
    Warrenpoint, Ireland
    Hook it up to your PC and see what mode it's on. I had to enable it via the software in order to get it to work properly. And I had done it by screwing the pot on the TX. I think you need to do it in both TX and software.

    CBS