Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

NO LIVE IMAGE AFTER FW UPGRAD TO 1.9.6

Discussion in 'Pro/Adv Discussion' started by arturcongo, Oct 15, 2016.

  1. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    Hi All,

    i registered here in this forum as i have a hughe issue with my P3 pro. I have upgraded to lates firmware 1.9.6 and i have lost the live image on the iphone app.
    when i try to downgrade the drone to any other version ( 1.8.8 / 1.7 ) i get a steady sound and nothing is happen . i have read in may forums , but could not get a solution for this . Some users just send their drone back for RMA , but there must be another solution .

    i have read about a service. bin to delete all actual firmware on the drone and be able to update again , but also this bin didnt worked here.

    I am based in the DRC Congo and have no way in the moment to send the drone back to DJI.

    see below the log files and advise here please . The remote is still working and i can control the drone wiht it , i just dont get a live view on the app.

    any suggestions are highly appreciated .

    [00014241][01 00] Firmware upgrade finished successfully.

    [00014355]Done.


    [00014386]Packet [C:\P3X_FW_V01.09.0060.bin] resumed, card sn [0xb0ce6a92].

    [00014426]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00014493]Version checking[2]...

    [00014561][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00014644][03 06][00] v2.1.6.18 -> v2.4.20.18 need upgrade.

    [00014683][04 00][00] v1.38.0.0 -> v1.44.0.0 need upgrade.

    [00014780][11 00][00] v1.6.1.0 -> v1.8.0.0 need upgrade.

    [00017380][11 01][00] v1.6.1.0 -> v2.0.0.33, firmware v1.6.1.0 not support.

    [00017410][11 01][00] v1.6.1.0 -> v2.0.0.33

    [00017489][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.

    [00017553][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.

    [00017634][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.

    [00017709][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.

    [00030245][15 00][00] device not detected.

    [00030332][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.

    [00030450][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.

    [00030489][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00030525][01 00][05] v1.30.5036 -> v1.30.5036

    [00030557][01 01][00] v1.6.2736 -> v1.30.5036 need upgrade

    [00043091][08 00][00] device not detected.

    [00043153][09 00][00] v1.7.0.3 -> v3.0.0.10 need upgrade.

    [00043188]Done.


    [00043220]Firmware upgrading[2]...

    [00043367][01 01] Firmware upgrade start...

    [00073628][01 01] Firmware upgrade finished successfully.

    [00073697][12 00] Firmware upgrade start...

    [00140728][12 00] Firmware upgrade finished successfully.

    [00140777][12 01] Firmware upgrade start...

    [00212589][12 01] Firmware upgrade finished successfully.

    [00212649][12 02] Firmware upgrade start...

    [00273502][12 02] Firmware upgrade finished successfully.

    [00273555][12 03] Firmware upgrade start...

    [00337599][12 03] Firmware upgrade finished successfully.

    [00337658][17 00] Firmware upgrade start...

    [00443508][17 00] Firmware upgrade finished successfully.

    [00443555][17 01] Firmware upgrade start...

    [00504531][17 01] Firmware upgrade finished successfully.

    [00504664][11 00] Firmware upgrade start...

    [00554664][11 00] Firmware upgrade finished successfully.

    [00554923][03 06] Firmware upgrade start...

    [00935046][03 06] Firmware upgrade finished successfully.

    [00935104][09 00] Firmware upgrade start...

    [00987122][09 00] Firmware upgrade finished successfully.

    [00987181][04 00] Firmware upgrade start...

    [01045844][04 00] Firmware upgrade finished successfully.

    [01045880]Done.


    [01045918]Version checking[3]...

    [01045981][03 05][00] v34.2.0.9 -> v34.2.0.9

    [01046065][03 06][05] v2.4.20.18 -> v2.4.20.18

    [01046110][04 00][05] v1.44.0.0 -> v1.44.0.0

    [01046224][11 00][05] v1.8.0.0 -> v1.8.0.0

    [01046381][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [01046419][11 01][00] v1.8.0.0 -> v2.0.0.33

    [01046519][12 00][05] v1.10.0.0 -> v1.10.0.0

    [01046608][12 01][05] v1.10.0.0 -> v1.10.0.0

    [01046700][12 02][05] v1.10.0.0 -> v1.10.0.0

    [01046814][12 03][05] v1.10.0.0 -> v1.10.0.0

    [01059350][15 00][00] device not detected.

    [01059434][17 00][05] v1.1.1.7 -> v1.1.1.7

    [01059551][17 01][05] v1.0.2.7 -> v1.0.2.7

    [01059601][19 00][00] v1.0.8.96 -> v1.0.8.96

    [01059636][01 00][05] v1.30.5036 -> v1.30.5036

    [01059672][01 01][05] v1.30.5036 -> v1.30.5036

    [01072206][08 00][00] device not detected.

    [01072303][09 00][05] v3.0.0.10 -> v3.0.0.10

    [01072337]Packet upgrade failed at version checking.




    [00014626]========== 2016.10.13 14:22:33. boot(15) ============

    [00014662]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xb0ce6a92].

    [00014694]Packet upgrade start...


    [00014734]Packet checking...

    [00014775]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00014842]Done.




    Regards, Artur
     
  2. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    [00014875]Version checking[1]...

    [00014965][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015039][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00015079][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015222][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00015344][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00015380][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00015568][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015668][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015748][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015847][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028383][15 00][00] device not detected.

    [00028508][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028626][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028692][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028729][01 00][00] v1.30.5036 -> v1.30.5036

    [00028767][01 01][00] v1.30.5036 -> v1.30.5036

    [00041305][08 00][00] device not detected.

    [00041372][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041407]Packet upgrade failed at version checking.




    [00012454]========== remo-con disconnect. boot(15) ============

    [00012485]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0xb0ce6a92].

    [00012515]Packet upgrade start...


    [00012557]Packet checking...

    [00012594]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00012662]Done.


    [00012694]Version checking[1]...

    [00012757][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00012811][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00012859][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00012900][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00013011][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00013095][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00013160][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00013240][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00013321][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00025857][15 00][00] device not detected.

    [00025936][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026035][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026082][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026120][01 00][00] v1.30.5036 -> v1.23.3419

    [00026155][01 01][00] v1.30.5036 -> v1.23.3419

    [00038687][08 00][00] device not detected.

    [00038722]Packet upgrade failed at version checking.




    [00012539]========== remo-con disconnect. boot(15) ============

    [00012576]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0xb0ce6a92].

    [00012606]Packet upgrade start...


    [00012647]Packet checking...

    [00012686]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00012750]Done.


    [00012783]Version checking[1]...

    [00012924][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00012985][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00013035][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00013088][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00013204][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00013273][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00013349][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00013428][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00013524][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00026056][15 00][00] device not detected.

    [00026144][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026248][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026310][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026349][01 00][00] v1.30.5036 -> v1.23.3419

    [00026387][01 01][00] v1.30.5036 -> v1.23.3419

    [00038925][08 00][00] device not detected.

    [00038960]Packet upgrade failed at version checking.




    [00014978]========== remo-con disconnect. boot(15) ============

    [00015009]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0xb0ce6a92].

    [00015048]Packet upgrade start...


    [00015090]Packet checking...

    [00015126]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00015188]Done.


    [00015224]Version checking[1]...

    [00015296][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015356][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00015396][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00015465][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00015576][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00015669][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00015750][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00015824][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00015906][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00028448][15 00][00] device not detected.

    [00028526][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028645][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028704][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028738][01 00][00] v1.30.5036 -> v1.23.3419

    [00028776][01 01][00] v1.30.5036 -> v1.23.3419

    [00041310][08 00][00] device not detected.

    [00041345]Packet upgrade failed at version checking.




    [00012646]========== remo-con disconnect. boot(15) ============

    [00012683]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0xb0ce6a92].

    [00012812]Packet upgrade start...


    [00012858]Packet checking...

    [00012893]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00012968]Done.


    [00013010]Version checking[1]...

    [00013091][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00013156][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00013198][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00013261][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00013371][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00013448][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00013525][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00013600][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00013681][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00026220][15 00][00] device not detected.

    [00026303][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026426][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026480][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026518][01 00][00] v1.30.5036 -> v1.23.3419

    [00026557][01 01][00] v1.30.5036 -> v1.23.3419

    [00039097][08 00][00] device not detected.

    [00039133]Packet upgrade failed at version checking.




    [00014648]========== remo-con disconnect. boot(15) ============

    [00014680]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xb0ce6a92].

    [00014713]Packet upgrade start...


    [00014754]Packet checking...

    [00014797]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00014864]Done.


    [00014898]Version checking[1]...

    [00014959][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015015][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00015065][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015175][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00015275][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00015316][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00015384][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015484][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015564][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015656][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028190][15 00][00] device not detected.

    [00028286][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028405][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028487][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028522][01 00][00] v1.30.5036 -> v1.30.5036

    [00028630][01 01][00] v1.30.5036 -> v1.30.5036

    [00041175][08 00][00] device not detected.

    [00041226][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041259]Packet upgrade failed at version checking.




    [00014849]========== remo-con disconnect. boot(15) ============

    [00014885]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00014923]Packet upgrade start...


    [00014961]Packet checking...

    [00015004]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00015071]Done.


    [00015106]Version checking[1]...

    [00015176][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015257][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00015298][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015417][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00015537][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00015573][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00015670][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015745][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015831][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015925][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028464][15 00][00] device not detected.

    [00028560][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028685][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028736][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028772][01 00][00] v1.30.5036 -> v1.30.5036

    [00028809][01 01][00] v1.30.5036 -> v1.30.5036

    [00041354][08 00][00] device not detected.

    [00041417][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041457]Packet upgrade failed at version checking.




    [00014667]========== 2016.10.14 00:11:05. boot(15) ============

    [00014705]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00014744]Packet upgrade start...


    [00014788]Packet checking...

    [00014832]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00014898]Done.


    [00014934]Version checking[1]...

    [00014997][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015077][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00015121][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015242][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00015357][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00015487][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00015566][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015646][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015727][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015801][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028343][15 00][00] device not detected.

    [00028431][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028541][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028606][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028652][01 00][00] v1.30.5036 -> v1.30.5036

    [00028692][01 01][00] v1.30.5036 -> v1.30.5036

    [00041232][08 00][00] device not detected.

    [00041287][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041331]Packet upgrade failed at version checking.




    [00014860]========== remo-con disconnect. boot(15) ============

    [00014898]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00014937]Packet upgrade start...


    [00014976]Packet checking...

    [00015024]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00015093]Done.


    [00015131]Version checking[1]...

    [00015200][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015284][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00015329][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00015390][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00015499][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00015568][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00015662][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00015748][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00015844][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00028383][15 00][00] device not detected.

    [00028470][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028589][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028674][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028713][01 00][00] v1.30.5036 -> v1.23.3419

    [00028752][01 01][00] v1.30.5036 -> v1.23.3419

    [00041290][08 00][00] device not detected.

    [00041329]Packet upgrade failed at version checking.




    [00223155]========== 2016.10.14 00:14:15. boot(15) ============

    [00223199]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00223238]Packet upgrade start...


    [00223279]Packet checking...

    [00223320]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00223472]Done.


    [00223511]Version checking[1]...

    [00223598][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00223681][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00223745][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00223797][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00223922][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00224033][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00224131][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00224231][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00224330][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00236879][15 00][00] device not detected.

    [00236964][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00237112][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00237180][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00237225][01 00][00] v1.30.5036 -> v1.23.3419

    [00237265][01 01][00] v1.30.5036 -> v1.23.3419

    [00249804][08 00][00] device not detected.

    [00249844]Packet upgrade failed at version checking.




    [00014675]========== 2016.10.14 00:18:48. boot(15) ============

    [00014714]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00014756]Packet upgrade start...


    [00014798]Packet checking...

    [00014841]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00014910]Done.


    [00014950]Version checking[1]...

    [00015026][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015104][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00015150][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00015204][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00015331][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00015424][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00015525][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00015609][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00015725][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00028267][15 00][00] device not detected.

    [00028356][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028475][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028532][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028572][01 00][00] v1.30.5036 -> v1.23.3419

    [00028613][01 01][00] v1.30.5036 -> v1.23.3419

    [00041159][08 00][00] device not detected.

    [00041198]Packet upgrade failed at version checking.




    [00048671]========== remo-con disconnect. boot(15) ============

    [00048807]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00048850]Packet upgrade start...


    [00048900]Packet checking...

    [00048943]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00049014]Done.


    [00049061]Version checking[1]...

    [00049139][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00049214][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00049264][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00049327][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00049435][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00049507][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00049615][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00049703][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00049795][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00062338][15 00][00] device not detected.

    [00062419][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00062549][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00062605][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00062646][01 00][00] v1.30.5036 -> v1.23.3419

    [00062687][01 01][00] v1.30.5036 -> v1.23.3419

    [00075235][08 00][00] device not detected.

    [00075276]Packet upgrade failed at version checking.




    [00012488]========== remo-con disconnect. boot(15) ============

    [00012532]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00012573]Packet upgrade start...


    [00012621]Packet checking...

    [00012665]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00012734]Done.


    [00012779]Version checking[1]...

    [00012847][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00012923][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00012974][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00013081][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00013201][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00013245][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00013337][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00013411][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00013510][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00013591][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00026134][15 00][00] device not detected.

    [00026210][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026832][17 01][00] v0.0.0.0 -> v1.0.2.7 need upgrade.

    [00026973][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00027015][01 00][00] v1.30.5036 -> v1.30.5036

    [00027060][01 01][00] v1.30.5036 -> v1.30.5036

    [00039616][08 00][00] device not detected.

    [00039692][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00039731]Done.


    [00041773]Waiting for user confirm...

    [00051821]Timeout, start upgrade automatically.


    [00051908]Firmware upgrading[1]...

    [00051969][17 01] Firmware upgrade start...

    [00111050][17 01] Firmware upgrade finished successfully.

    [00111094]Done.


    [00111135]Version checking[2]...

    [00111207][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00111311][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00111369][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00111486][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00111606][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00111652][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00111745][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00111820][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00111920][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00112000][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00124558][15 00][00] device not detected.

    [00124636][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00124776][17 01][05] v1.0.2.7 -> v1.0.2.7

    [00124835][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00124883][01 00][00] v1.30.5036 -> v1.30.5036

    [00124926][01 01][00] v1.30.5036 -> v1.30.5036

    [00137471][08 00][00] device not detected.

    [00137537][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00137584]Packet upgrade failed at version checking.




    [00012515]========== remo-con disconnect. boot(15) ============

    [00012557]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00012606]Packet upgrade start...


    [00012651]Packet checking...

    [00012695]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00012768]Done.


    [00012809]Version checking[1]...

    [00012910][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00013015][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00013071][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00013210][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.

    [00013451][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.

    [00013564][11 01][00] v1.7.0.0 -> v2.0.0.33

    [00013665][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00013767][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00013864][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00013964][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00026508][15 00][00] device not detected.

    [00026595][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026745][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026804][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026849][01 00][00] v1.30.5036 -> v1.30.5036

    [00026892][01 01][00] v1.30.5036 -> v1.30.5036

    [00039436][08 00][00] device not detected.

    [00039505][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00039548]Done.


    [00041590]Waiting for user confirm...

    [00051639]Timeout, start upgrade automatically.


    [00051725]Firmware upgrading[1]...

    [00051778][11 00] Firmware upgrade start...

    [00098729][11 00] Firmware upgrade finished successfully.

    [00098773]Done.


    [00098815]Version checking[2]...

    [00098919][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00099019][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00099074][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00099196][11 00][05] v1.8.0.0 -> v1.8.0.0

    [00099354][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00099397][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00099519][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00099623][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00099728][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00099830][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00112378][15 00][00] device not detected.

    [00112486][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00112629][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00112689][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00112737][01 00][00] v1.30.5036 -> v1.30.5036

    [00112779][01 01][00] v1.30.5036 -> v1.30.5036

    [00125322][08 00][00] device not detected.

    [00125390][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00125436]Packet upgrade failed at version checking.




    [00015115]========== 2016.10.14 19:38:04. boot(15) ============

    [00015160]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xb0ce6a92].

    [00015205]Packet upgrade start...


    [00015345]Packet checking...

    [00015392]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00015476]Done.


    [00015523]Version checking[1]...

    [00015603][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015702][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00015761][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015883][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00016005][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00016051][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00016161][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00016269][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00016364][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00016451][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028997][15 00][00] device not detected.

    [00029092][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00029233][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00029303][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00029351][01 00][00] v1.30.5036 -> v1.30.5036

    [00029397][01 01][00] v1.30.5036 -> v1.30.5036

    [00041953][08 00][00] device not detected.

    [00042022][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00042069]Packet upgrade failed at version checking.
     
  3. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    [00014675]========== 2016.10.14 00:18:48. boot(15) ============

    [00014714]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00014756]Packet upgrade start...


    [00014798]Packet checking...

    [00014841]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00014910]Done.


    [00014950]Version checking[1]...

    [00015026][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015104][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00015150][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00015204][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00015331][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00015424][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00015525][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00015609][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00015725][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00028267][15 00][00] device not detected.

    [00028356][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028475][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028532][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028572][01 00][00] v1.30.5036 -> v1.23.3419

    [00028613][01 01][00] v1.30.5036 -> v1.23.3419

    [00041159][08 00][00] device not detected.

    [00041198]Packet upgrade failed at version checking.




    [00048671]========== remo-con disconnect. boot(15) ============

    [00048807]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00048850]Packet upgrade start...


    [00048900]Packet checking...

    [00048943]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00049014]Done.


    [00049061]Version checking[1]...

    [00049139][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00049214][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00049264][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00049327][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00049435][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00049507][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00049615][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00049703][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00049795][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00062338][15 00][00] device not detected.

    [00062419][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00062549][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00062605][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00062646][01 00][00] v1.30.5036 -> v1.23.3419

    [00062687][01 01][00] v1.30.5036 -> v1.23.3419

    [00075235][08 00][00] device not detected.

    [00075276]Packet upgrade failed at version checking.




    [00012488]========== remo-con disconnect. boot(15) ============

    [00012532]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00012573]Packet upgrade start...


    [00012621]Packet checking...

    [00012665]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00012734]Done.


    [00012779]Version checking[1]...

    [00012847][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00012923][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00012974][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00013081][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00013201][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00013245][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00013337][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00013411][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00013510][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00013591][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00026134][15 00][00] device not detected.

    [00026210][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026832][17 01][00] v0.0.0.0 -> v1.0.2.7 need upgrade.

    [00026973][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00027015][01 00][00] v1.30.5036 -> v1.30.5036

    [00027060][01 01][00] v1.30.5036 -> v1.30.5036

    [00039616][08 00][00] device not detected.

    [00039692][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00039731]Done.


    [00041773]Waiting for user confirm...

    [00051821]Timeout, start upgrade automatically.


    [00051908]Firmware upgrading[1]...

    [00051969][17 01] Firmware upgrade start...

    [00111050][17 01] Firmware upgrade finished successfully.

    [00111094]Done.


    [00111135]Version checking[2]...

    [00111207][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00111311][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00111369][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00111486][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00111606][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00111652][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00111745][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00111820][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00111920][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00112000][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00124558][15 00][00] device not detected.

    [00124636][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00124776][17 01][05] v1.0.2.7 -> v1.0.2.7

    [00124835][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00124883][01 00][00] v1.30.5036 -> v1.30.5036

    [00124926][01 01][00] v1.30.5036 -> v1.30.5036

    [00137471][08 00][00] device not detected.

    [00137537][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00137584]Packet upgrade failed at version checking.




    [00012515]========== remo-con disconnect. boot(15) ============

    [00012557]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00012606]Packet upgrade start...


    [00012651]Packet checking...

    [00012695]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00012768]Done.


    [00012809]Version checking[1]...

    [00012910][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00013015][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00013071][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00013210][11 00][00] v1.7.0.0 -> v1.8.0.0 need upgrade.

    [00013451][11 01][00] v1.7.0.0 -> v2.0.0.33, firmware v1.7.0.0 not support.

    [00013564][11 01][00] v1.7.0.0 -> v2.0.0.33

    [00013665][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00013767][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00013864][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00013964][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00026508][15 00][00] device not detected.

    [00026595][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026745][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026804][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026849][01 00][00] v1.30.5036 -> v1.30.5036

    [00026892][01 01][00] v1.30.5036 -> v1.30.5036

    [00039436][08 00][00] device not detected.

    [00039505][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00039548]Done.


    [00041590]Waiting for user confirm...

    [00051639]Timeout, start upgrade automatically.


    [00051725]Firmware upgrading[1]...

    [00051778][11 00] Firmware upgrade start...

    [00098729][11 00] Firmware upgrade finished successfully.

    [00098773]Done.


    [00098815]Version checking[2]...

    [00098919][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00099019][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00099074][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00099196][11 00][05] v1.8.0.0 -> v1.8.0.0

    [00099354][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00099397][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00099519][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00099623][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00099728][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00099830][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00112378][15 00][00] device not detected.

    [00112486][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00112629][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00112689][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00112737][01 00][00] v1.30.5036 -> v1.30.5036

    [00112779][01 01][00] v1.30.5036 -> v1.30.5036

    [00125322][08 00][00] device not detected.

    [00125390][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00125436]Packet upgrade failed at version checking.




    [00015115]========== 2016.10.14 19:38:04. boot(15) ============

    [00015160]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xb0ce6a92].

    [00015205]Packet upgrade start...


    [00015345]Packet checking...

    [00015392]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00015476]Done.


    [00015523]Version checking[1]...

    [00015603][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015702][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00015761][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015883][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00016005][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00016051][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00016161][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00016269][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00016364][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00016451][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028997][15 00][00] device not detected.

    [00029092][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00029233][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00029303][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00029351][01 00][00] v1.30.5036 -> v1.30.5036

    [00029397][01 01][00] v1.30.5036 -> v1.30.5036

    [00041953][08 00][00] device not detected.

    [00042022][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00042069]Packet upgrade failed at version checking.




    [00014600]========== remo-con disconnect. boot(15) ============

    [00014643]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0xb0ce6a92].

    [00014688]Packet upgrade start...


    [00014739]Packet checking...

    [00014792]Packet vlink 01.08.0080 <-> 01.07.0060.

    [00014868]Done.


    [00014912]Version checking[1]...

    [00015004][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015105][03 06][00] v2.4.20.18 -> v2.4.14.5

    [00015155][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015285][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00015385][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015494][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015594][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015693][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028239][15 00][00] device not detected.

    [00028339][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028469][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028523][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028570][01 00][00] v1.30.5036 -> v1.30.5036

    [00028621][01 01][00] v1.30.5036 -> v1.30.5036

    [00041240][08 00][00] device not detected.

    [00041324][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041368]Packet upgrade failed at version checking.




    [00190497]========== 2016.10.14 21:08:33. boot(1) ============

    [00190546]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0xb0ce6a92].

    [00190596]Packet upgrade start...


    [00190654]Packet checking...

    [00190699]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00190777]Done.


    [00190831]Version checking[1]...

    [00190913][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00191013][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00191068][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00191197][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00191331][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00191381][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00191485][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00191581][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00191660][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00191760][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00204309][15 00][00] device not detected.

    [00204422][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00204541][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00204607][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00204656][01 00][00] v1.30.5036 -> v1.30.5036

    [00204705][01 01][00] v1.30.5036 -> v1.30.5036

    [00217247][08 00][00] device not detected.

    [00217308][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00217362]Packet upgrade failed at version checking.




    [00290521]========== remo-con disconnect. boot(15) ============

    [00290574]Packet [C:\P3X_FW_V01.09.0060.bin] detected, card sn [0x821d3cc9].

    [00290620]Packet upgrade start...


    [00290673]Packet checking...

    [00290724]Packet vlink 01.09.0060 <-> 01.08.0080.

    [00290804]Done.


    [00290854]Version checking[1]...

    [00290958][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00291060][03 06][00] v2.4.20.18 -> v2.4.20.18

    [00291114][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00291258][11 00][00] v1.8.0.0 -> v1.8.0.0

    [00291378][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.

    [00291424][11 01][00] v1.8.0.0 -> v2.0.0.33

    [00291604][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00291712][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00291807][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00291907][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00304453][15 00][00] device not detected.

    [00304543][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00304694][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00304761][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00304806][01 00][00] v1.30.5036 -> v1.30.5036

    [00304855][01 01][00] v1.30.5036 -> v1.30.5036

    [00317406][08 00][00] device not detected.

    [00317474][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00317518]Packet upgrade failed at version checking.




    [00016094]========== remo-con disconnect. boot(15) ============

    [00016142]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0xdac059f1].

    [00016192]Packet upgrade start...


    [00016246]Packet checking...

    [00016298]Packet vlink 01.08.0080 <-> 01.07.0060.

    [00016379]Done.


    [00016434]Version checking[1]...

    [00016514][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00016594][03 06][00] v2.4.20.18 -> v2.4.14.5

    [00016653][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00016774][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00016883][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00016983][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00017092][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00017188][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00029738][15 00][00] device not detected.

    [00029843][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00029973][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00030038][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00030087][01 00][00] v1.30.5036 -> v1.30.5036

    [00030149][01 01][00] v1.30.5036 -> v1.30.5036

    [00042697][08 00][00] device not detected.

    [00042784][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00042832]Packet upgrade failed at version checking.




    [00012838]========== 2016.10.14 22:53:46. boot(15) ============

    [00012883]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x821d3cc9].

    [00012937]Packet upgrade start...


    [00012987]Packet checking...

    [00013033]Packet vlink 01.07.0060 <-> 01.06.0040.

    [00013114]Done.


    [00013237]Version checking[1]...

    [00013316][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00013417][03 06][00] v2.4.20.18 -> v2.4.13.0

    [00013472][04 00][00] v1.44.0.0 -> v1.41.0.0

    [00016118][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00016220][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00016326][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00018927][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00019038][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00031589][15 00][00] device not detected.

    [00031678][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00031820][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00031879][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00031932][01 00][00] v1.30.5036 -> v1.29.4920

    [00031979][01 01][00] v1.30.5036 -> v1.29.4920

    [00044525][08 00][00] device not detected.

    [00044597][09 00][00] v3.0.0.10 -> v2.13.0.0

    [00044643]Packet upgrade failed at version checking.




    [00012547]========== remo-con disconnect. boot(15) ============

    [00012597]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x821d3cc9].

    [00012645]Packet upgrade start...


    [00012695]Packet checking...

    [00012743]Packet vlink 01.08.0080 <-> 01.07.0060.

    [00012826]Done.


    [00012874]Version checking[1]...

    [00012961][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00013061][03 06][00] v2.4.20.18 -> v2.4.14.5

    [00013118][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00013242][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00013350][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00013459][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00013556][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00013681][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00026235][15 00][00] device not detected.

    [00026350][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026496][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026556][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026602][01 00][00] v1.30.5036 -> v1.30.5036

    [00026658][01 01][00] v1.30.5036 -> v1.30.5036

    [00039207][08 00][00] device not detected.

    [00039296][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00039342]Packet upgrade failed at version checking.




    [00014651]========== remo-con disconnect. boot(15) ============

    [00014789]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0x821d3cc9].

    [00014837]Packet upgrade start...


    [00014887]Packet checking...

    [00014938]Packet vlink 01.08.0080 <-> 01.07.0060.

    [00015016]Done.


    [00015070]Version checking[1]...

    [00015148][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015227][03 06][00] v2.4.20.18 -> v2.4.14.5

    [00015281][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00015428][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00015516][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015616][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015717][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015816][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028378][15 00][00] device not detected.

    [00028476][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028611][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028676][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028731][01 00][00] v1.30.5036 -> v1.30.5036

    [00028781][01 01][00] v1.30.5036 -> v1.30.5036

    [00041328][08 00][00] device not detected.

    [00041397][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041446]Packet upgrade failed at version checking.




    [00014135]========== remo-con disconnect. boot(15) ============

    [00014187]Packet [C:\P3X_FW_V01.08.0080.bin] detected, card sn [0xdac059f1].

    [00014237]Packet upgrade start...


    [00014298]Packet checking...

    [00014352]Packet vlink 01.08.0080 <-> 01.07.0060.

    [00014439]Done.


    [00014492]Version checking[1]...

    [00014596][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00014696][03 06][00] v2.4.20.18 -> v2.4.14.5

    [00014768][04 00][00] v1.44.0.0 -> v1.44.0.0

    [00014920][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00015025][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015126][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015225][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015331][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00027884][15 00][00] device not detected.

    [00028001][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028151][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028231][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028285][01 00][00] v1.30.5036 -> v1.30.5036

    [00028341][01 01][00] v1.30.5036 -> v1.30.5036

    [00040975][08 00][00] device not detected.

    [00041052][09 00][00] v3.0.0.10 -> v3.0.0.10

    [00041102]Packet upgrade failed at version checking.




    [00014698]========== remo-con disconnect. boot(15) ============

    [00014751]Packet [C:\P3X_FW_V01.07.0060.bin] detected, card sn [0x821d3cc9].

    [00014805]Packet upgrade start...


    [00014871]Packet checking...

    [00014927]Packet vlink 01.07.0060 <-> 01.06.0040.

    [00015008]Done.


    [00015065]Version checking[1]...

    [00015163][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00015263][03 06][00] v2.4.20.18 -> v2.4.13.0

    [00015320][04 00][00] v1.44.0.0 -> v1.41.0.0

    [00015463][11 00][00] v1.8.0.0 -> v1.7.15.1

    [00015572][12 00][00] v1.10.0.0 -> v1.10.0.0

    [00015672][12 01][00] v1.10.0.0 -> v1.10.0.0

    [00015803][12 02][00] v1.10.0.0 -> v1.10.0.0

    [00015912][12 03][00] v1.10.0.0 -> v1.10.0.0

    [00028468][15 00][00] device not detected.

    [00028574][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00028712][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00028779][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00028831][01 00][00] v1.30.5036 -> v1.29.4920

    [00028890][01 01][00] v1.30.5036 -> v1.29.4920

    [00041450][08 00][00] device not detected.

    [00041520][09 00][00] v3.0.0.10 -> v2.13.0.0

    [00041579]Packet upgrade failed at version checking.




    [00012700]========== remo-con disconnect. boot(15) ============

    [00012756]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x821d3cc9].

    [00012808]Packet upgrade start...


    [00012871]Packet checking...

    [00012924]Packet vlink 01.03.0020 <-> 01.01.0009.

    [00013005]Done.


    [00013064]Version checking[1]...

    [00013142][03 05][00] v34.2.0.9 -> v34.2.0.9

    [00013220][03 06][00] v2.4.20.18 -> v2.2.6.19

    [00013278][04 00][00] v1.44.0.0 -> v1.40.0.0

    [00013357][09 00][00] v3.0.0.10 -> v1.7.0.3

    [00013480][11 00][00] v1.8.0.0 -> v1.7.0.0

    [00013569][12 00][00] v1.10.0.0 -> v1.8.0.0

    [00013670][12 01][00] v1.10.0.0 -> v1.8.0.0

    [00013769][12 02][00] v1.10.0.0 -> v1.8.0.0

    [00013870][12 03][00] v1.10.0.0 -> v1.8.0.0

    [00026428][15 00][00] device not detected.

    [00026609][17 00][00] v1.1.1.7 -> v1.1.1.7

    [00026744][17 01][00] v1.0.2.7 -> v1.0.2.7

    [00026809][19 00][00] v1.0.8.96 -> v1.0.8.96

    [00026870][01 00][00] v1.30.5036 -> v1.23.3419

    [00026925][01 01][00] v1.30.5036 -> v1.23.3419

    [00039478][08 00][00] device not detected.

    [00039531]Packet upgrade failed at version checking.
     
  4. J Dot

    Joined:
    Apr 10, 2014
    Messages:
    1,756
    Likes Received:
    891
    Location:
    Sarasota, FL. USA!
    It does not look like firmware was successfully installed?

    Try this


    J Dot
    :cool:
     
    dirkclod likes this.
  5. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    wow , thanks for the tipp. I am able now to trigger the update again without the continius beeeeeep.

    will keep you updated once done....
     
    J Dot likes this.
  6. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    Hmm ,

    looks like the process dont works , it delays the continuous beepp just for some more minutes and the update fails again .

    any other suggestion ?
     
  7. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    one think to add here , the owner of the drone did an upgrade from unkknow version ( possibly delivery version ) to 1.9.6

    he didnt followed the step by step upgrade procedure.
     
  8. J Dot

    Joined:
    Apr 10, 2014
    Messages:
    1,756
    Likes Received:
    891
    Location:
    Sarasota, FL. USA!
    How are you transferring .bin file to your SD card?
    Card reader?
    Try first formatting card with app ( make sure you first transfer anything you want to keep OFF the card before formatting it,
    Next hook USB cable directly to gimbal from PC.
    Write ONLY .bin file to card, once complete, turn craft off , unplug cable, then turn craft back on, see if update starts, if not try trick again, let us know. ( I found card readers can be a pain, ) but if you bought it used, you might have something else wrong?

    Let us know,
    I'll be running some errands for the next couple hours, but I'll be back later today.

    Ps, you might also try a different SD card, you never know?

    J Dot
    :cool:
     
    dirkclod likes this.
  9. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    I was using a micro sd adapter and used the sd card slot in the PC and Mac . I have followed now your suggestion . Result:


    without trick it start the upgrade process and after about 20 - 30 seconds it move to the continious beep. i stopped there.

    with the trick it starts the process and after about 5 minutes its starts with the continuoes beep . i stopped there too. in the app it shows version 1.9.6 but still no live image from the drone on the iphone.

    The drone is brand new with 0 flight hours. the previous owner tried to set it up and get stucked when he tired to ugrade to latest firmware .
     
  10. Blue Bird

    Joined:
    Jun 11, 2015
    Messages:
    615
    Likes Received:
    159
    Location:
    Dade County, Florida
    Question?
    The loud beeping that you hear.
    How many loud beeps do you hear in sequence when turning on the aircraft and what color are the lights?
     
  11. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    when i turn it on regularly without trick , i hear a sequence of 3 times 2 beeps , with color of led is flashing green,

    then the led is changing between red and green with 33 short beeps , before the continuous beep starts and the red led goes steady on .

    after the last trail i have the below status :

    upload_2016-10-15_21-39-32.png
     
  12. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    and still no live feed
     

    Attached Files:

  13. J Dot

    Joined:
    Apr 10, 2014
    Messages:
    1,756
    Likes Received:
    891
    Location:
    Sarasota, FL. USA!
    What smart device you using?
    And have you checked your gimbal wiring CLOSELY? I'm thinking it might be a ribbon cable issue?
    If app is showing firmware is up to date as well as app and Tx firmware, try formatting card again, turn phantom off then on again without .bin file, and see if you can retrieve the update file, as the file shows not successfully updated, but app shows it is? Also without .bin file see if it starts up differently? ( but I'd check those wires out first, maybe a single wire pulled loose from connector? ) worth a look, also inspect ribbon all points you can see, to see if any spot had pulled loose a bit or is in crooked.

    J Dot
    :cool:
     
    dirkclod and Blue Bird like this.
  14. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    I Am using a Iphone 6 plus , which is working fine with the second P3 pro that i have here .

    i have formated the card again in the drone and rebooted it. The log file is empty after reboot and also not bin file there.

    The drone is starting normal without any issues. Only NO live Image on the Phone . i can start the drone and move the gimbal with the remote .

    I have also checked the ribon cable , unplugged the connector and plugged it back , i cant see any damage or loose cable there.
     
  15. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    also i can record photos and videos over the remote .
     
  16. J Dot

    Joined:
    Apr 10, 2014
    Messages:
    1,756
    Likes Received:
    891
    Location:
    Sarasota, FL. USA!
    Hmmmmmmmm?
    The photos and video you record can you view or sync them with your iPhone?

    It has me stumped! Only thing that comes to mind is encryption! As earlier firmwares did not have them, but newer does.

    What ver Tx you got a,b, or c?

    Have you tried reverting your Tx firmware by one? Or downgrading your a/c firmware by 1?
    I believe, tx would be 1.76, or similar, and 1.0.80 on a/c. Might be encryption issue, not sure?

    Let me know, if you know how, or I can help, both are simple to do.

    J Dot
    :cool:
     
    dirkclod likes this.
  17. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    I can View and sync the photos , but not the videos.

    I have tried already to downgrade the remote to version 1.5.80 ( this is the inly one who is available for downgrade . but after downgrade still same image transmission issue .

    The remote is version C1 ( written on the back of the remote ) .

    Downgrading the Drone to verison 1.8.80 failed every time i try .
     
  18. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
    this could be an issue ?
     
  19. arturcongo

    Joined:
    Oct 15, 2016
    Messages:
    16
    Likes Received:
    1
  20. J Dot

    Joined:
    Apr 10, 2014
    Messages:
    1,756
    Likes Received:
    891
    Location:
    Sarasota, FL. USA!
    Try selecting custom and choose a channel? Maybe something is weird?
    And last option , completely delete app, reboot phone ( off-on ) reinstall app, maybe app is stuck on your other craft?, as for video, only 720x??? Will transfer, 4K will only transfer to 4K, my iPad asks me you upload in 720x??, if I choose yes, they will upload, but my pics are the same, asks me every time. I've yet to change camera settings! My bad!
    I'm out of ideas?????

    Let me know in the above idea?

    J Dot
    :cool:
     
    dirkclod likes this.