Hello all. I am the owner of a Phantom 1 . I ave already upgraded the main board with the DJI P330CB-H3-2D upgade kit, which I modded for the canbus port which works great. I also have an Immersion video transmiter to a Black Pearl monitor / receiver. I would like to add either the Zenmuse H3-3D gimbal or a Walkera . Trying to keep everything as light and
neat as possible would like the gimbal to plug into the 8 pin connector on the main board. I already have the 6 pi.n connector going to the IOSD mini and the Video TX. My question is will this 8 pin port support the Zenmuse H3-3D) (DJI says it is for H3-2D) Would it possibly work with the Walkera gimbal ? Trying to eliminate the external GCU since the upgrade board already has a GCU. I work in electronics so I have no problems soldering,wiring etc. Any help would be appreciated. Ray
neat as possible would like the gimbal to plug into the 8 pin connector on the main board. I already have the 6 pi.n connector going to the IOSD mini and the Video TX. My question is will this 8 pin port support the Zenmuse H3-3D) (DJI says it is for H3-2D) Would it possibly work with the Walkera gimbal ? Trying to eliminate the external GCU since the upgrade board already has a GCU. I work in electronics so I have no problems soldering,wiring etc. Any help would be appreciated. Ray