Motors will not power on

[ChukMil]

The other day I flew into a tree and crashed. I got a motor obstructed message. After that got MC Data Error and needed IMU calibration ...would not calibrate. I did get the MC Data Error corrected and IMU caibrated. All looks good on the app...says safe to fly GPS but the motors will not start from the app or the controllers. Do you think when the motors were obstructed I burned out the motors or ESCs? Would the app not indicate motor issues.
My bird is down..please help Thanks

 

[Trackman1]

Some people have had to give their P3 a sharp rap after a crash.
You might find some of these google links helpful. Read thru. It is explained why.
https://www.google.ca/search?q=NO+M...&oe=utf-8&gws_rd=cr&ei=97gHV93PHZO4jwPthqygBA

 

[ChukMil]

Some people have had to give their P3 a sharp rap after a crash.
You might find some of these google links helpful. Read thru. It is explained why.
https://www.google.ca/search?q=NO+M...&oe=utf-8&gws_rd=cr&ei=97gHV93PHZO4jwPthqygBA

Yeah I did that. Thats how I got rid of the "MC Data Error" a that allowed me to do the IMU calibration...like I say everything looks good on the Pilot App but motors will not start

 

[Trackman1]

Can you control the camera . Down/up left/right (it only moves slightly left/right.

 

[ChukMil]

Can you control the camera . Down/up left/right (it only moves slightly left/right.

Yes camera works perfectly ..tilts up and down , take still and video. Stabilizes perfectly
even updated firmware without a hitch....but motors will not spin

 

[Bailey5]

Relink your controller and calibrate the controller.