Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Loaded P2

Discussion in 'Phantom 2 Discussion' started by Bill_Burkert, Mar 15, 2014.

  1. Bill_Burkert

    Joined:
    Jan 11, 2014
    Messages:
    112
    Likes Received:
    0
    Has anybody put the AVL58 inside a P2?

    I have an AVL58, mini iOSD, Flytrex, cable hub and Ground Station stuff on the way. I dislike putting anything on the outside, I lived through all this with a 3DR, and only have the flytrex on the outside because I need access to the micro sdcard. I was able to route the cable through a leg hole and it is pretty clean. I am also trying to save as much weight as possible.

    The AVL58 has two boards, which looks like one board is fan power and an interface. The second board looks to be the transmitter. Maybe the fan be tossed?

    I have seen the iosd inside but never an avl58. Any help or links showing how this can be accomplished would be fantastic.

    Come PhantomPilots let's figure this out because we will all get there sooner or later.
     
  2. d4ddyo

    Joined:
    Mar 11, 2014
    Messages:
    889
    Likes Received:
    0
    Sounds really extensive. So you mount the Transmitter inside and extend the wire outside to a clover leaf antenna?