Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

Is my Firemware REALLY updated?

Discussion in 'Pro/Adv Discussion' started by DeputyDrone, Oct 23, 2015.

  1. DeputyDrone

    Joined:
    Oct 8, 2015
    Messages:
    66
    Likes Received:
    22
    Been flying my P3P for about 3 weeks now now issue. I updated the firmware in the bird and controller per new P3P procedures. In both cases the txt file indicated the updates were "good".

    When I start warming up the bird, I get a momentary flash of "Firmware needs Update" but it goes out and then all the usual "go" flight indicators light off.

    Do I really have a problem? I reloaded the firmware again and got a "good" indication but the momentary flashing of Firmware needs updating still comes on.
     
  2. msinger

    Approved Vendor

    Joined:
    Oct 30, 2014
    Messages:
    24,735
    Likes Received:
    7,513
    Location:
    Harrisburg, PA (US)
    Check the About section in the DJI GO app. It lists the installed firmware versions.
     
  3. sonof40

    Joined:
    Oct 22, 2015
    Messages:
    576
    Likes Received:
    94
    Location:
    San Ramon, CA
    I have the following:

    APP 2.3.0
    remote cnrl 1.4.30
    Firmware 1.3.2

    Can I fly?
     
  4. bobmyers

    Joined:
    May 10, 2015
    Messages:
    3,611
    Likes Received:
    867
    Location:
    San Antonio, TX
    Update the air craft firmware to 1.4.0
     
    sonof40 likes this.
Loading...
Similar Threads - Firemware REALLY updated Forum Date
What do the two signal bar graphs really measure? Pro/Adv Discussion Today at 10:30 PM
Recreational... Commercial... I really hope the FAA addresses this soon... Or, am I off base? Rules and Regulations May 14, 2017
Britains Swizzels Sweets Factory / Mill in 2.7k - Really proud of this Photos and Video May 11, 2017
Litchi waypoint mission uploads seem really slow to P3 standard Control (Go, Litchi, etc..) May 4, 2017
really strange unbalanced gimbal issue Pro/Adv Discussion Apr 19, 2017