Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

How to reverse camera tilt?

Discussion in 'Phantom 2 Vision + Help' started by lavamantis, Apr 21, 2015.

  1. lavamantis

    Joined:
    Apr 21, 2015
    Messages:
    5
    Likes Received:
    1
    I saw some people mention that they were able to reverse the camera tilt. I mean the wheel on the transmitter of the DJI Phantom 2+ Vision. Basically I want the opposite of what the default is, since during flight, my instinct about which direction to move it is ALWAYS the wrong direction. This is even after many flights!

    I've seen some people post in the forums that they've done this, but I've googled, searched all the docs, and went through all the screens in the 2 DJI apps and still can't see any indication that its possible.

    Thanks!
     
  2. CityZen

    Joined:
    Oct 22, 2014
    Messages:
    940
    Likes Received:
    36
    Location:
    NYC
    Run the Phantom Assistant, go to the Basic/RC screen, click on the NORM/REV button beside X1.
     
    Built Drones likes this.
  3. Built Drones

    Joined:
    Oct 21, 2014
    Messages:
    169
    Likes Received:
    76
    Location:
    Jacksonville, FL
    When you go into the NAZA assistant, click on the "basic" tab, then choose "RC". To the right of the X1 control (the one that controls your gimbal) there is a button that says "REV". If you click that, it should reverse the channel, down will be up, etc. Hope that helps :)

    -KC
     
  4. dirkclod

    dirkclod Moderator
    Staff Member

    Joined:
    May 9, 2014
    Messages:
    10,625
    Likes Received:
    5,693
    Location:
    Amory Mississippi
    o_O Well ether way will fix that issue for ya ! I call it the hit submit at the same time fix ;)
    Welcome to the forum lavamantis :)
     
    Built Drones likes this.
  5. lavamantis

    Joined:
    Apr 21, 2015
    Messages:
    5
    Likes Received:
    1
    Ah ha, it's the Phantom assistant program that connects to the quad - not the one that connects to the controller. It worked! Thanks!
     
    iracer99 likes this.
  6. lavamantis

    Joined:
    Apr 21, 2015
    Messages:
    5
    Likes Received:
    1
    Yup, that worked great. Thanks for the reply!
     
  7. lavamantis

    Joined:
    Apr 21, 2015
    Messages:
    5
    Likes Received:
    1
    Thanks! Easier than I thought.