Welcome to PhantomPilots.com

Sign up for a weekly email of the latest drone news & information

How to remove MC from central circuit

Discussion in 'General Discussion' started by djb6582, Aug 9, 2014.

  1. djb6582

    Joined:
    Jul 24, 2014
    Messages:
    10
    Likes Received:
    0
    I just received a new central circuit, after frying it by unplugging the camera with the quad powered up. I have the board out but cant figure how to remove the Main controller. Is it soldered on or is can I just pry.. Any help on this rainy day would be greatly appreciated.
     
  2. DKDarkness

    Joined:
    Dec 16, 2013
    Messages:
    554
    Likes Received:
    3
    Location:
    Denmark
    If you mean the NAZA-M, it is fixed with double sided tape. Slowly and carefully pry it of :) (been there, done that :))
     
  3. djb6582

    Joined:
    Jul 24, 2014
    Messages:
    10
    Likes Received:
    0
    Thanks DK.... Wasn't expecting the tape to hold the tight.. got it soldered back and just about done I removed one cable before I thought about taking photos.. So if any one has a good pic of the M1-F2 side id be in your debt.. Hope to be up and filming if the weather breaks today, just completed an antenna mod on the Tx and Wifi booster...
     
  4. DKDarkness

    Joined:
    Dec 16, 2013
    Messages:
    554
    Likes Received:
    3
    Location:
    Denmark
  5. djb6582

    Joined:
    Jul 24, 2014
    Messages:
    10
    Likes Received:
    0
    Thanks again ..... cant wait for a test flight!!